Bedienungsanleitung Satel INT-TSG-BSB (Seite 19 von 28) (Englisch)

699393

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

SATEL INT-TSG 17

8. If the macro command is not to be available, when any of the partitions operated by the

keypad is armed, enable the D

ISABLED IF ARMED

option.

9. If the macro command is to be run instantly on tapping the icon of macro command group,

enable the A

UTOEXECUTE

option (if so, only this single macro command is to be assigned

to the group).

10. If the confirmation messages are not to be displayed after running the macro command,

enable the N

O CONFIRMATION MESSAGES

option.

11. Select the icon which will be used to present the macro command on the keypad.

12. If the icon is to present the status of selected output:

 enable the S

TATE FOLLOW OUTPUT

option;

 indicate the output number;

 select the icons which will illustrate inactive and active status of the output.

13. Click on the button in the “Command” field and select from the list the function the new

macro command is to execute.

14. Program the command parameters as required.

15. Click the “Add” button. A new command will appear in the list of commands assigned to

the macro command. After clicking the command you can still make a correction of its

parameters. After making the changes, click the “Change” button.

16. Repeat the steps 13-15, if you want to add next commands.

17. Click the “Groups” tab.

18. Click the group to be edited.

19. Enter the group name, if it is to be displayed on the keypad.

20. Select the icon which will be used to present the group of macro commands on the

keypad.

21. Enable the M

ACRO AVAILABLE ON THE STATUS SCREEN

option for the group, if macro

commands assigned to the group are to be displayed after touching a corner of the status

screen.

22. Enable the I

CON VISIBLE ON THE STATUS SCREEN

option for the group, if the group icon is to

be displayed in a corner of the status screen.

23. Click the “Add macro” button. A list of all defined macro commands will be displayed.

24. Click on a macro command to add it to the group. The macro command will be put in the

tree under the group.

25. Click on the “Write” button to write the macro command related data to the keypad.

7.1.5 Status screen

The status screen related data are stored in the keypad memory. Before you start

configuring the status screen, click on the “Read” button in the “Status screen” tab to

read the data from the keypad. Having configured the status screen, click on the

“Write” button in the “Status screen” tab to write the data to the keypad. The status

screen related data are not read / written when you click on the button in the

main menu of D

LOAD

X program.

If the I

CON VISIBLE ON THE STATUS SCREEN

option is enabled for a group of macro

commands, do not place any elements in the screen corner where the icon will be

displayed, or they will be covered by the icon. The D

LOAD

X program indicates using

appropriate graphic symbols the screen corners where the icons will be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSG-BSB Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSG-BSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info