699391
9
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
SATEL INT-TSI 7
Fig. 5. Securing the Ethernet cable.
6.2 Addressing
The keypad must have an individual address set in it:
from the 0 to 3 range, if it is connected to the INTEGRA 24 or INTEGRA 32 control panel;
from the 0 to 7 range, if it is connected to another INTEGRA or INTEGRA Plus control
panel.
By default, address 0 is set in the keypad.
When started, only the control panel with factory default settings can provide support
for all keypads connected to the bus, irrespective of the addresses set in them. In all
other cases, the control panel will block operation of the keypads having identical
addresses.
The address set in the keypad determines the numbers to be given to the keypad zones (see
the INSTALLER MANUAL for INTEGRA or INTEGRA Plus control panels).
6.2.1 Programming keypad address by means of service function
1. Find the tab in which the terminal is available (in the keypad with factory settings, tap the
icon on the tab bar).
2. Enter the service code (by default: 12345) and touch the key. The user menu will
be displayed.
3. Touch the key. The service mode will start up.
4. Start the KEYPADS ADDR. function (STRUCTURE HARDWARE IDENTIFICATION KEYPADS
ADDR
.). A window will be displayed in which you can set the address (after starting the
function, you can set the address in all keypads connected to the control panel).
5. Using the and keys, set the address and then tap the icon. The terminal
with service menu will be displayed on the screen.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel INT-TSI-WSW wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel INT-TSI-WSW

Satel INT-TSI-WSW Installationsanweisung - Deutsch - 34 seiten

Satel INT-TSI-WSW Bedienungsanleitung - Englisch - 20 seiten

Satel INT-TSI-WSW Bedienungsanleitung - Englisch - 24 seiten

Satel INT-TSI-WSW Bedienungsanleitung - Holländisch - 20 seiten

Satel INT-TSI-WSW Installationsanweisung - Holländisch - 33 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info