Bedienungsanleitung Satel Integra 128 Plus (Seite 88 von 102) (Englisch)

699072

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

86 Programming SATEL

Having selected the CONTACT ID (FULL) or SIA (FULL) format you do not need to

program the assignment of identifiers and any event codes. The control panel will send

the codes according to the format specification and the performed subdivision into

objects.

In the TELIM format, events can only be sent via the analog telephone line.

Telephone

Tel. number [Tel. 1 number] – basic telephone number of the monitoring station.

Backup tel. no. [Tel. 2 number] – a backup telephone number of the monitoring station. The

control panel will make an attempt of reporting to that telephone number, if the attempt of

reporting to the basic telephone number fails.

Backup format [Tel. 2 format] – format in which event codes are sent to the backup

telephone number of the monitoring station.

Repetitions [Repetition count] – the number of attempts to establish telephone connection

with the monitoring station after which, if there is no connection (busy number, no

answer from the station, etc.), the control panel will suspend reporting. Up to 31 retries

can be programmed. Programming the value 0 means that monitoring will be suspended

after 8 attempts.

Suspend time – the time for which telephone reporting is suspended, after making the

programmed number of attempts to establish connection with the monitoring station. The

control panel will resume the attempt of establishing telephone connection with the

monitoring station after this time expires or a next, new event occurs. Up to 30 minutes

can be programmed. Programming the value 0 means that an attempt to establish

telephone connection with the monitoring station will only be taken after occurrence of a

new event in the system.

ETHM/GPRS

Server [IP address] – the address of STAM-2 monitoring station (or SMET-256 converter). It

can be entered in the form of IP address (4 decimal numbers separated by dots) or as a

name.

Port – the number of port through which communication with the monitoring station will be

effected.

Station key [Key (MS)] – the key with which the data sent to the monitoring station will be

encrypted (a string of up to 12 alphanumeric characters). The parameter applies to the IP

SATEL format.

IP format [SIA-IP] – if the event codes are to be sent via Ethernet or GPRS, specify whether

SATEL format or SIA-IP format (SIA DC-09 standard) will be used.

Protocol [UDP] – if the event codes are to be sent via Ethernet or GPRS, specify whether

TCP or UDP protocol will be used.

ETHM key [Key (ETHM)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting via Ethernet. The parameter applies to the

IP SATEL format.

GPRS key [Key (GPRS)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting using the GPRS technology. The parameter

applies to the IP SATEL format.

It is recommended that the maximum number of characters be programmed for the

keys and that letters, digits and special characters be used, as this will ensure higher

security of the transmission.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Plus Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info