Bedienungsanleitung Satel Integra 128 (Seite 94 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

92 Programming SATEL

• battery status – information on low battery is sent when the battery voltage drops below

11 V for more than 12 minutes (3 battery tests). The expander will kept sending this

information to the control panel until the battery voltage rises and remains above 11 V for

longer than 12 minutes (3 battery tests).

• AC power status – information on the loss of power supply is sent when the AC power loss

lasts for more than 30 seconds. The AC power restore is reported with the same delay.

Low battery information for the first zone of ACX-201 expander indicates overload of the

AUX1 or AUX2 power supply output, for the second zone – discharged battery, for the third

zone – loss of AC power..

Additional information is also sent by the ACX-220 expander if it is powered from a power

supply unit connected to the APS connector. In the case of this expander, the low battery

information provided by the control panel means:

first zone – power supply overload,

second zone – low battery,

third zone – AC mains loss.

9.3.4 230 V AC wireless controllers

Turning on the output to which the controller is assigned turns on the relay controlling the

230 V AC circuit (turns on power).

The zone to which the wireless controller is assigned is activated when the relay controlling

the 230 V AC circuit is turned on [operating modes 1 and 2] / ASW-200 controller button is

pressed [operating mode 0] / ASW-210 controller input is activated [operating mode 0] (select

the appropriate zone type).

10. Timers

The timers enable some functions to be automatically executed by the control panel

(arming/disarming, turning on/off devices connected to outputs, etc.). The timer compares the

time to that of the control panel clock and executes the selected function at the programmed

time.

10.1 Programming the timers

The timers can be programmed:

• using the keypad, in the service mode, by means of the functions available in the TIMERS

submenu,

• using the DLOADX program, in the “Timers” window.

10.2 Timer parameters

Name – individual timer name (up to 16 characters).

User edits – if this option is enabled, the users can edit the timer parameters by using the

keypad ([code] CHANGE OPTIONS TIMERS).

[day of week] – you can program the timer start/end time for each day of the week.

Everyday – you can program the timer start/end time which will apply to those days of the

week for which no timer start/end time has been programmed.

Exception – the period during which the timer will be started/ended at a different time. 4

exceptions can be programmed for a timer. You can program for each exception:

– the date from which the exception will apply,

– the date to which the exception will apply,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info