Bedienungsanleitung Satel Integra 128 (Seite 98 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

96 Programming SATEL

formats. Enable this option in the event of telephone reporting if the monitoring station

acknowledges receiving events in a non-standard way (the kiss-off signal is longer than

800 ms).

Longer waiting for initial handshake – with this option enabled, the control panel will wait

longer for handshake from the monitoring station in case of sending events in the Ademco

Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if

the monitoring station sends a non-standard initial handshake.

Identifier confirmation required – the option refers to the SIA format. If it is enabled, the

control panel waits for acknowledgement by the monitoring station of receiving the

identifier with which the data were sent. The option refers to the telephone reporting.

6-character identifier – the option refers to the SIA format. If it is enabled, events will be

sent with a 6-character identifier. It consists of 2 parts: 2-character prefix and 4-character

identifier.

Send event source name – the option refers to the SIA format. If it is enabled, the name of

event source (zone, user, etc.) will also be sent along with the event code.

Send event partition name – the option refers to the SIA format. If it is enabled, the name of

partition where the event occurred will also be sent along with the event code.

Each data block conf. required – the option refers to the SIA format. If it is enabled, the

control panel waits for acknowledgement by the monitoring station of receiving each data

block. The option refers to the telephone reporting.

Extended charset – the option refers to the SIA format. If it is enabled, not only ASCII

characters, but also national characters can be sent.

12.1.2 Monitoring station 1 / Monitoring station 2

Reporting format [Tel. 1 format] – format in which event codes are sent to the monitoring

station.

Having selected the CONTACT ID (FULL) or SIA (FULL) format you do not need to

program the assignment of identifiers and any event codes. The control panel will send

the codes according to the format specification and the performed subdivision into

objects.

In the TELIM format, events can only be sent via the analog telephone line.

Telephone

Backup tel. no. [Tel. 2 number] – a backup telephone number of the monitoring station. The

control panel will make an attempt of reporting to that telephone number, if the attempt of

reporting to the basic telephone number fails.

Backup format [Tel. 2 format] – format in which event codes are sent to the backup

telephone number of the monitoring station.

Repetitions [Repetition count] – the number of attempts to establish telephone connection

with the monitoring station after which, if there is no connection (busy number, no

answer from the station, etc.), the control panel will suspend reporting. Up to 31 retries

can be programmed. Programming the value 0 means that monitoring will be suspended

after 8 attempts.

Suspend time – the time for which telephone reporting is suspended, after making the

programmed number of attempts to establish connection with the monitoring station. The

control panel will resume the attempt of establishing telephone connection with the

monitoring station after this time expires or a next, new event occurs. Up to 30 minutes

can be programmed. Programming the value 0 means that an attempt to establish

telephone connection with the monitoring station will only be taken after occurrence of a

new event in the system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info