Bedienungsanleitung Satel Integra 128 (Seite 99 von 114) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 97

ETHM/GPRS

Server [IP address] – the address of STAM-2 monitoring station (or SMET-256 converter). It

can be entered in the form of IP address (4 decimal numbers separated by dots) or as a

name.

Port – the number of port through which communication with the monitoring station will be

effected.

Station key [Key (MS)] – the key with which the data sent to the monitoring station will be

encrypted (a string of up to 12 alphanumeric characters). The parameter applies to the IP

SATEL format.

IP format [SIA-IP] – if the event codes are to be sent via Ethernet or GPRS, specify whether

SATEL format or SIA-IP format (SIA DC-09 standard) will be used.

Protocol [UDP] – if the event codes are to be sent via Ethernet or GPRS, specify whether

TCP or UDP protocol will be used.

ETHM key [Key (ETHM)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting via Ethernet. The parameter applies to the

IP SATEL format.

GPRS key [Key (GPRS)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting using the GPRS technology. The parameter

applies to the IP SATEL format.

It is recommended that the maximum number of characters be programmed for the

keys and that letters, digits and special characters be used, as this will ensure higher

security of the transmission.

Identifiers

Each event code is sent to the monitoring station with an identifier. Up to 8 identifiers plus a

system identifier can be programmed. Sent with the system identifier are events related to

the alarm system (troubles, tests, etc.).

4 characters (digits or letters from A to F) must be programmed for each identifier. Using the

digit 0 in the identifier is not recommended.

For the pulse, ADEMCO EXPRESS, CONTACT ID (SELECTED) or SIA (SELECTED) formats, you must

define which events will be sent with the given identifier (see: “Identifiers assignment”).

For the CONTACT ID (FULL) or SIA (FULL) formats, each object has its own identifier.

Therefore, the identifiers of non-existing objects need not to be programmed. In the

system event identifier field, you should re-enter the identifier of the object which is

responsible for the system (for example, the object, where the control panel is

installed).

SIA / TELIM prefix

2 characters which will precede each of the identifiers in case of the SIA and TELIM formats.

Thus an identifier consisting of 6 characters can be obtained. 2 hexadecimal characters

(digits or letters from A to F) can be programmed. Entering 00 means that the prefix will not

be added. Using the digit 0 in the prefix is not recommended.

Events assignment

If the events are to be sent to both stations (STATION 1 AND 2 is selected), you can define

which event types will be reported to the given station.

It is not possible to assign events for the CONTACT ID (FULL) and SIA (FULL) formats.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info