Bedienungsanleitung Satel Integra 128 (Seite 29 von 51) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

SATEL INTEGRA 27

– Zone isolation [Zones isolate]

– Clock setting

– Trouble state checking [Troubles view.]

– Event log reviewing [Events viewing]

– Detectors resetting [Zones resett.]

– Options programming [Options chang.]

– Access to menu TEST [Tests]

– Downloading starting [Downloading]

– Access to BI & MONO outputs [Outs control]

– System state review in GUARDX [GUARDX using]

– Resetting outputs [Clr.latch.outs]

– Simple user – having entered the code, confirmed with the key, the user never

selects the partitions which are to be armed / disarmed. All partitions the user has

access will be armed / disarmed.

– Administrator – the user has access to the menu functions which are reserved for the

administrator

Keypads etc. – additional modules from which the user will be able to operate the system

(proximity card arm/disarm devices, partition keypads, code locks, reader expanders).

Proximity cards / DALLAS chips – if the proximity card / DALLAS iButton reader is used in

the system, a proximity card / DALLAS iButton can be assigned to the user, which will

allow the user to operate the system by means of readers.

Keyfobs – in case of the INTEGRA 128-WRL control panel or any other control panel to

which a module with keyfob support is connected (ACU-220, ACU-280, ACU-120,

ACU-270, ACU-100, ACU-250, INT-RX or INT-RX-S), a keyfob can be assigned to the

user, which will allow to operate the system remotely. The user may have up to 2 keyfobs:

the APT-200 (supported by the ABAX 2 / ABAX system) or the APT-100 (supported by the

ABAX system) and the 433 MHz (supported by the INT-RX or INT-RX-S modules).

Buttons – the button functions are available, if a keyfob has been assigned to the user. It is

possible to assign a zone to a keyfob button or combination of buttons. The zone will be

violated upon pressing the button / combination of buttons. The assigned zone should not

exist physically.

Events (RX) / Events (ABAX) – if a keyfob has been assigned to the user, it is possible to

define whether pressing the appropriate keyfob button will result in logging an event which

informs that the keyfob has been used.

ABAX confirmation – if an ABAX 2 / ABAX system keyfob has been assigned to the user, it

is possible to determine the status of which outputs will be presented on the keyfob LEDs

on pressing any button.

Name – individual user name.

5.8.1 User types

The name as used in the keypad is shown in the square brackets. The description includes

only the codes, but the information provided below applies to all identifiers assigned to the

user.

Normal – basic type of user.

One-time [Single] – the user will get one-time access.

Renewable [Time renewable] – the user has access to the system for a defined period of

time. The user validity time should be defined. Before the validity time expires, the control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info