Bedienungsanleitung Satel Integra 128 (Seite 30 von 51) (Englisch)

699073

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

28 User Manual SATEL

panel will prompt the user to change the code. After the code has been changed, the

validity time will run from the beginning.

Temporary [Time not renew.] – the user has access to the system for a defined period of

time. The user validity time should be defined. After the validity time expires, the user will

have no access to the system.

Duress – code to be used in hold-up and duress situations. Use it to trigger a silent alarm

and send the event code to the monitoring station.

“Mono” output operating [Mono outputs] – code for control of the MONO SWITCH type

outputs.

“Bi” output operating [Bi outputs] – code for control of the BI SWITCH type outputs.

Blocking partition [Part.temp.block.] – the code enables access to the armed partitions.

Using the code will block the armed partition(s) (the partition zones will not trigger the

burglary alarm). The blocking time is defined individually for each user within the range

from 1 to 109 minutes. If, however, the time of blocking for guard round is defined for the

partition and its duration is longer, the blocking will last longer.

Cash machine zones bypassing [Acces.to cash m.] – the code to be used to unblock

access to the cash dispenser (the 24H CASH MACHINE type zones will be temporarily

bypassed in the partition).

Guard – using this code means having made the round (additionally, it can result in the

partition being temporarily bypassed for the duration of guard round). The installer defines

the modules which are used to confirm making the round and determines the time interval

between successive rounds. If such a user is granted access to the partition, he/she will

have the same possibilities as the NORMAL type user.

Scheduled – the user has access to the system as per the time schedule for a specified

period of time. It is necessary to select the schedule (the schedule is programmed by the

installer) and define the user validity period.

5.8.2 Adding new user

1. Enter the code and confirm with the

key

2. Press in turn the 2 and 1 keys. The list of functions to define the user parameters will be

displayed.

If the service code has been entered, before the list of functions is displayed, it is

necessary to specify the object in which the new user is to be created (the service

code enables access to all objects).

3. Using the appropriate functions, define the user's parameters.

At least one identifier, i.e. code, proximity card, DALLAS iButton or keyfob, must be

assigned to the user.

The new user may not be granted a higher authority level than the person who is

adding that user to the system.

4. Press the

key

5. When a prompt appears, asking you if the changes are to be saved, press the 1 key.

6. A message will inform you that a new user has been created. Press the

key to return to

the USER submenu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 128 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info