Bedienungsanleitung Satel Integra 24 (Seite 39 von 114) (Englisch)

699079

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 37

2. A drop-down menu will be displayed. Select in it the appropriate control panel modem (in

case of the INTEGRA 128-WRL control panel, select “Modem - INTEGRA with ext.

modem” for CSD communication). A window will open in which information on the modem

initialization will be displayed.

3. Click on the “Connect” button.

4. The control panel will answer, confirm answering the connection, hang up, and then call

back the programmed computer telephone number.

5. The DLOADX program will answer the connection automatically or the program user must

accept establishing the communication (which depends on the settings programmed in

the “Configuration” window, “Modem” tab). A suitable message will inform about the

connection being established.

Connection initiated by SMS message

Control panel settings:

• program the telephone number of modem connected do computer,

• enable the EXTERNAL MODEM and MODEM ISDN/GSM/ETHM options.

And additionally, for the INTEGRA 128-WRL control panel:

• program the control command, which will be sent in the SMS message to initiate

communication between the control panel and the DLOADX program,

• configure the GSM telephone.

DLOADX program settings:

• configure the modem communication parameters.

If communication is to take place through the SATEL GSM module connected to the control

panel, configure settings of the module (see: GSM module manual).

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Select the “ISDN/GSM modem” in it. A window will

open in which modem initialization information will be displayed.

3. Send an SMS message to the telephone number of INTEGRA 128-WRL control panel /

GSM module connected to the control panel. In the case of INTEGRA 128-WRL, the SMS

message should have the following form:

xxxx=csd= (“xxxx” – the control command programmed in the control panel, initializing

communication with the DLOADX program) – the control panel will call the

programmed telephone number of the computer, the data will be sent using CSD

technology,

xxxx=yyyy= (“xxxx” – the control command programmed in the control panel, initializing

communication with the DLOADX program; “yyyy” – telephone number of the computer

to which the control panel is to connect) – the control panel will call the telephone

number sent in the SMS message (the computer telephone number programmed in

control panel will be ignored), the data will be sent using CSD technology.

In the case of GSM module connected to the control panel, the SMS message should

have the following form:

xxxxxx. or xxxxxx= (“xxxxxx” – the control command programmed in the GSM module,

initializing communication with the DLOADX program through modem) – the control

panel will call, via the GSM module, the programmed computer telephone number,

xxxxxx=yyyy. or xxxxxx=yyyy= (“xxxxxx” – the control command programmed in the

GSM module, initializing communication with the DLOADX program through modem;

“yyyy” – computer telephone number to which the control panel is to connect) – the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 24 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info