Bedienungsanleitung Satel Integra 24 (Seite 42 von 114) (Englisch)

699079

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

40 Programming SATEL

Initiating connection from the DLOADX program

Required settings of the ETHM-1 Plus / ETHM-1 module:

• programmed number of TCP port used for communication.

Required settings of the DLOADX program for direct communication with the module:

• programmed: Ethernet module address (SERVER), number of TCP port used for

communication and data encryption key (DLOADX KEY) or selected set of parameters

“LAN: ETHM-1, Address n” (settings of the ETHM-1 Plus / ETHM-1 module with address

“n” will be used).

Before initiating the connection, make sure that the suitable connection establishing

method is selected in the “Connection settings” window, “Connection” field.

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Click in turn on “TCP/IP: DLOADX -> ETHM” and

“LAN/WAN” (WAN connection) or “LAN” (LAN connection).

3. A window will open. Click on the “Connection” button in the window.

4. The DLOADX program will inform you about establishing connection by means of

a suitable message.

Initiating connection from the keypad

If the INT-GSM module is connected to the ETHM-1 Plus module and connection over

Ethernet cannot be established, an attempt will be made to establish connection via

GPRS.

Required settings of the ETHM-1 Plus / ETHM-1 module:

• programmed: address of computer with DLOAX program (SERVER) and number of TCP

port used for communication.

Required settings of the DLOADX program for direct communication with the module:

• programmed: number of TCP port used for communication and data encryption key

(DLOADX KEY) or selected set of parameters “LAN: ETHM-1, Address n” (settings of the

ETHM-1 Plus / ETHM-1 module with address “n” will be used).

1. Click on the button in the DLOADX program.

2. A drop-down menu will be displayed. Select “TCP/IP: DLOADX <- ETHM/INT-GSM” in it.

3. In the LCD keypad connected to the control panel, start the ETHM-1 DLOADX function

([code] DOWNLOADING ETHM-1 DLOADX). The function is available to the

installer, administrator and the user having the DOWNLOADING STARTING right.

4. The DLOADX program will inform you about establishing connection by means of

a suitable message.

Initiating connection by SMS message

The INT-GSM module must be connected to the ETHM-1 Plus module. If connection

via Ethernet cannot be established, an attempt will be made to establish

communication via GPRS.

Required settings of the ETHM-1 Plus module:

• programmed: address of computer with DLOAX program (DLOADX SERVER) and number

of TCP port used for communication,

• programmed control command, which, if sent in the SMS message, will initiate connection

with the DLOADX program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 24 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info