Bedienungsanleitung Satel Integra 24 (Seite 66 von 114) (Englisch)

699079

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

64 Programming SATEL

as the output cut-off time) and if another violation occurs after the power is turned on

again, the fire alarm will be triggered. The output can be reset by the user.

45. PARTITION BLOCK STATUS – indicates a temporary blocking of the partition armed status. If

the output cut-off time is different from 0, the output will signal that the partition blocking is

ending (the output will turn on for a programmed time before the blocking ends).

46. OUTPUTS LOGICAL AND – active when all the control outputs with normal polarity are

active and all the control outputs with reversed polarity are inactive (because of the POL.+

option, the output can be used for logical negation). See: “Logical functions of outputs”

p. 68.

47. OUTPUTS LOGICAL OR – active when any control output with normal polarity is active or

any control output with reversed polarity is inactive (because of the POL.+ option, the

output can be used for logical negation). See: “Logical functions of outputs” p. 68.

48...63 VOICE MESSAGE 1–16 – activated by the telephone messaging function. It enables any

external device to be used for playback of notification messages. When programming the

telephone messaging, the number of message to be played back is to be programmed.

The messaging will turn on the corresponding output.

64...79 REMOTE SWITCH 1–16 – intended for control using the telephone (DTMF). The control

is available to the users having a telephone code. Additionally, the outputs can be

controlled using the user OUTS CONTROL function (see: USER MANUAL).

If an output of the REMOTE SWITCH type is to be controlled from the keypad, it must be

assigned to a group of outputs (see: “Output groups” p. 68).

If a cut-off time has been programmed for a REMOTE SWITCH type output, the output will

operate similarly to the 24. MONO SWITCH type output.

80. NO GUARD TOUR – indicates lack of guard tour.

81. AC LOSS (MAINBOARD) - LONG – indicates the loss of AC power supply to the control panel

mainboard, when the trouble lasts long enough to be saved to the event log (see: AC LOSS

REPORT DELAY

parameter p. 75).

82. AC LOSS (EXPANSION MODULE) - LONG – indicates the loss of AC power supply to the

modules with power supply unit, when the trouble lasts long enough to be saved to the

event log (the delay is programmed individually in each module).

83. OUTPUTS OFF – the output activates when all selected outputs stop signaling.

84. ACCESS CODE ENTERING – indicates the entering the user code.

85. USE OF ACCESS CODE – indicates the using a code for arming/disarming.

86. DOOR OPEN INDICATOR – indicates the opening the door supervised by a module executing

the access control functions.

87. DOOR TOO LONG OPENED INDICATOR – indicates the long open door supervised by a module

executing the access control functions.

88. BURGLARY ALARM (NO FIRE AND TAMPER) – signals burglary alarms and PANIC alarms from

keypads.

89. 50% OF LOG MEMORY FILLED – informs that 50% of the event log area has been filled since

the last event log reading with the DLOADX program.

90. 90% OF LOG MEMORY FILLED – informs that 90% of the event log area has been filled since

the last event log reading with the DLOADX program.

91. AUTO-ARM DELAY START – signals starting the AUTO-ARMING DELAY countdown for a

programmed time period (see: p. 48).

92. AUTO-ARM DELAY STATUS – indicates the AUTO-ARMING DELAY countdown (see: p. 48).

93. UNAUTHORIZED ACCESS – signals unauthorized opening of a door monitored by the module

executing access control functions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 24 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info