Bedienungsanleitung Satel Integra 256 Plus (Seite 54 von 102) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

52 Programming SATEL

4.3.5 Zone types

0. ENTRY/EXIT – a delayed zone combining two functions:

entry – violation of the zone starts entry delay counting in the partition and turns on delay

for the 3. INTERIOR DELAYED type zones,

exit – violation of the zone during exit delay countdown is equivalent to the partition exit.

1. ENTRY – violation of the zone starts entry delay counting in the partition and turns on delay

for the 3. INTERIOR DELAYED type zones.

2. DELAYED – a delayed-action zone with optional signaling of delay countdown in keypads.

3. INTERIOR DELAYED – the zone operates as a delayed one when:

– violation of another zone has triggered the entry delay countdown in the partition,

– the delay will be activated using the INT-ENT entry keypad (see the INT-SCR

multifunction keypad manual),

– arm mode type 2 or 3 is active and the DELAY IN 2&3 TYPE ARMING option is enabled for

the zone.

In other situations, the zone will act as an instant one.

4. PERIMETER – instant zone, which is already armed during exit delay countdown.

5. INSTANT – instant zone.

6. EXIT – violation of the zone during exit delay countdown is equivalent to the partition exit.

7. DAY/NIGHT – if disarmed, the zone will signal violation acoustically in keypads and on

the 9. DAY ALARM, 12. SILENT ALARM and 116. INTERNAL SIREN outputs. When armed, the

zone acts as the 5. INSTANT zone.

8. EXTERIOR – a zone with alarm verification: zone violation will start counting the surveillance

time – if a second violation takes place during this time, an alarm will be triggered. If the

SURVEILLANCE TIME is not programmed (the value 0 is entered), the alarm will be generated

upon the first violation.

9. 24H TAMPER – permanently armed zone, intended for the tamper circuits. The zone

violation will additionally cause a trouble condition.

10. 24H VIBRATION – permanently armed zone, intended for working with vibration detectors.

If the partition includes the 10. 24H VIBRATION zone, starting the procedure of arming

from the LCD keypad will initiate a test of vibration detectors (the 39. TEST VIBRATION

DETECTORS output is activated and the countdown of time remained to the test end is

running).

11. 24H CASH MACHINE – permanently armed zone, intended for protection of a cash machine.

12. PANIC-AUDIBLE – permanently armed zone, intended for operating the panic buttons.

13. PANIC-SILENT – permanently armed zone, intended for operating the panic buttons.

Violating the zone will trigger a silent alarm.

14. MEDICAL – BUTTON

15. PERSONAL EMERGENCY

The zone types 14 and 15 trigger alarm signaled in the LCD keypads and on the 12. SILENT

ALARM

outputs. The names of zones and codes of events from these zones are consistent

with the Contact ID reporting format.

16...31 COUNTING C1...16 – the counting zones will signal an alarm when the number of

violations counted during a specified time period exceeds the set value (see: “Counters”

p. 57). Violations of the counting zones in armed mode can be signaled at the 9. DAY

ALARM, 12. SILENT ALARM and 116. INTERNAL SIREN outputs.

32. 24H FIRE

33. 24H FIRE – SMOKE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info