Bedienungsanleitung Satel Integra 256 Plus (Seite 20 von 51) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

18 User Manual SATEL

The administrator defines whether the installer is to have access to the USERS

submenu (SERV. CAN EDIT option in the CHANGE OPTIONS submenu).

Masters – the submenu provides the following functions available to the installer:

New master – allows to create a new administrator.

Edit master – allows to edit the existing administrators.

Remove master – allows to remove the existing administrators.

Zone bypasses – the following functions are available in the submenu:

Inhibit – allows to temporarily bypass the zones (see: “Zone inhibiting” p. 31).

Isolate – allows to permanently bypass the zones (see: “Zone isolating” p. 31).

If the GRADE 3 option has been enabled by the installer, the ISOLATE function is only

available to the installer.

Set time – allows to program the control panel clock. The data are entered in the following

format:

time – hour:minute:second,

date – day:month:year.

System state – allows to view the troubles and, if the GRADE 3 global option has been

enabled by the installer, also the alarms and bypassed zones, as well as to check the

partition status.

Events – the submenu contains functions which allow to view the events saved to the control

panel memory (see: “Viewing the event log” p. 32).

Reset zones – running the function will result in a temporary deactivation of the

43. RESETABLE POWER SUPPLY type outputs, thus making it possible to reset the alarm

memory for detectors supplied from those outputs (e.g. fire detectors).

Clear latched outputs – allows to turn off some of the control panel outputs for which the

LATCH option is enabled, as well as the 9. DAY ALARM, 12. SILENT ALARM

and 116. INTERNAL SIREN type outputs.

Fin.f.door open – restores the normal operating mode in all modules executing the access

control functions (in case of fire, the doors controlled by these modules may be

automatically unlocked).

Change options – the following functions are available in the submenu:

Replace battery – allows to disable the tamper protection in the selected wireless keypad

for 3 minutes. During this time you can open the keypad enclosure and replace the

battery. The function is available if a wireless keypad is installed in the alarm system.

The function is supported by ACU-120 / ACU-270 controller with firmware version 5.03

and ACU-220 / ACU-280 controller.

Keypad chime – allows to turn on/off the CHIME in the keypad. The CHIME is five short

sounds by means of which the keypad will inform you e.g. that a door / window is open,

when the system is disarmed. The installer defines which zones of the alarm system

can trigger the CHIME.

Outputs chime – allows to block the chime signal from selected partitions on the

11. CHIME type output.

Timers – allows to program parameters of the timers controlling the 120. THERMOSTAT type

outputs, and other timers, the editing of which is permitted by the installer.

Temperatures – allows to edit the temperature thresholds and hysteresis for

120. THERMOSTAT type outputs.

Partition timers – allows to program the partition timers (see: “Programming the partition

timer” p. 33).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info