Bedienungsanleitung Satel Integra 256 Plus (Seite 21 von 51) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

SATEL INTEGRA Plus 19

No expanders tamper alarms – allows to temporarily disable the expansion module

tamper supervision. In case of any problems with the expansion modules, report the fact

to the installer.

Permanent service access – the option is available to the master user (administrator). If

enabled, the installer has permanent access to the alarm system, which, among other

things, enables the control panel to be programmed by using LCD keypad or DLOADX

program.

Enabling PERMANENT SERVICE ACCESS option will clear the installer access time

programmed with the SERVICE ACCESS function. On the other hand, programming the

installer access time will disable the PERMANENT SERVICE ACCESS option.

Service can edit – the option is available to the master user (administrator). If it is

enabled, the installer can add, edit and delete users in the administrator's object.

Service arm/disarm/clear/bypass – the option is available to the master user

(administrator). If it is enabled, the installer can arm/disarm the system, clear alarms

and bypass zones in the administrator object.

Permanent DLOADX access – the option is available to the master user (administrator).

If it is enabled, the control panel can be programmed by means of the DLOADX

program, irrespective of whether or not the installer has access to the alarm system.

DLOADX IP – enables programming the address of the computer, on which the DLOADX

program is installed. If the address is programmed, the control panel users can start

from the keypad the communication with the DLOADX program via ETHM-1 Plus /

ETHM-1 / INT-GSM module (see description of the ETHM-1 DLOADX and INT-GSM

DLOADX functions, available in the DOWNLOADING submenu). The address can be

entered as a name or IP address.

GUARDX IP – enables programming the address of the computer, on which the GUARDX

program is installed. If the address is programmed, the control panel users can start

from the keypad the communication with the GUARDX program via ETHM-1 Plus /

ETHM-1 / INT-GSM module (see description of the ETHM-1 GUARDX and INT-GSM

GUARDX functions, available in the DOWNLOADING submenu). The address can be

entered as a name or IP address.

Erase service message – allows the user to delete the service message.

Tests – the following functions are available in the submenu:

Partitions – allows to check the status of partitions accessible to the user and operated

from the keypad. The partition status is presented by means of a symbol. The numbers

placed on the glass allow you to identify the partition numbers. By factory default, the

partition status is shown using the following symbols (which can be changed by the

installer):

b - temporary partition blocking,

? - entry delay,

E - exit delay (less than 10 seconds),

e - exit delay (more than 10 seconds),

P - fire alarm,

A - alarm,

p - fire alarm memory,

a - alarm memory,

a - zone is armed,

- violated zones,

- zone is disarmed, zones OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info