Bedienungsanleitung Satel Integra 256 Plus (Seite 23 von 51) (Englisch)

699031

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

SATEL INTEGRA Plus 21

Proximity card test – allows to check the number of proximity card and establish to whom

it belongs (if the card belongs to a user of the system).

CA-64 PTSA test – allows to test the mimic board.

View masters – available to the administrator. It makes it possible to check in which

objects the master users are created.

Keypad name – allows to check the given keypad name.

File in DLOADX – displays the date and time of writing the data to the control panel by

means of the DLOADX program and the name of file with control panel data.

Panel version – displays information on the control panel firmware version.

STM program version – displays information on the program version of the processor

used to operate the control panel zones and power supply unit.

IP/MAC/IMEI/ID – displays the information related to the ETHM-1 Plus / ETHM-1 /

INT-GSM modules installed in the system. In the case of the ETHM-1 Plus / ETHM-1

module, the information includes:

− local IP address,

− MAC number,

− public IP address,

− individual identification number assigned to the ETHM-1 Plus module by the SATEL

server [ID].

In the case of the INT-GSM module, the information includes:

− IMEI number,

− individual identification number assigned to the INT-GSM module by the SATEL

server [ID],

− GSM signal strength for SIM1 / SIM2 cards,

− operator of the network into which the SIM1 / SIM2 card is logged,

− SIM1 / SIM2 card account balance (press to check the balance).

Use the  and  keys to scroll the information. If several modules are connected to the

control panel, use the  and  keys to scroll the list of modules.

If the INT-GSM module is connected to the ETHM-1 Plus module, information about

both modules is displayed, except that the IMEI number of INT-GSM module is not

shown.

Modules versions – allows to check the firmware versions for devices connected to the

control panel communication buses.

Time synchronization – allows to manually start synchronization of the control panel

clock and the time server. It applies to the control panel to which the ETHM-1 / ETHM-1

Plus / INT-GSM module is connected. The address of time synchronization server must

be programmed in the control panel.

The function is unavailable, if the time synchronization is running. Automatic time

synchronization takes place every day at 05:30 and after the control panel restart.

Service access – available to the master user (administrator). Allows to program the time

period of installer access to the alarm system. The time is programmed in hours.

Programming the value 0 means the installer will have no access.

Open door – allows to unlock the door controlled by the alarm system (modules executing

the access control functions) or activate the 101. CARD READ – EXPANDER type outputs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 256 Plus Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 256 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info