Bedienungsanleitung Satel Integra 64 (Seite 57 von 114) (Englisch)

699075

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 55

The zone types from 32 to 39 cause a fire alarm. The names of zones and codes of events

from these zones are consistent with the Contact ID reporting format. The fire zones (except

for 24H FIRE – BUTTON) can work with alarm verification.

40. 24H FIRE SUPERVISORY

41. 24H LOW WATER PRESSURE

42. 24H LOW CO2

43. 24H WATER VALVE DETECTOR

44. 24H LOW WATER LEVEL

45. 24H PUMP ACTIVATED

46. 24H PUMP FAILURE

47. NO ALARM ACTION – may be used to control the outputs. Additional options (STORE TO

EVENT LOG

, NO REPORTING and STORE EVENT ONLY IF ARMED) enable the zone to be used for

other applications e.g. supervising the keybox.

48. 24H AUXILIARY – PROTECTION LOOP

49. 24H AUXILIARY – GAS DETECTOR

50. 24H AUXILIARY – REFRIGERATION

51. 24H AUXILIARY – LOSS OF HEAT

52. 24H AUXILIARY – WATER LEAKAGE

53. 24H AUXILIARY – FOIL BREAK

54. 24H AUXILIARY – LOW BOTTLED GAS LEVEL

55. 24H AUXILIARY – HIGH TEMPERATURE

56. 24H AUXILIARY – LOW TEMPERATURE

57. TECHNICAL – DOOR OPEN – zone intended for supervising the status of the door defined as

DEPENDENT DOOR in the module executing the access control functions (partition keypad,

code lock, readers expander).

58. TECHNICAL – DOOR BUTTON – zone violation will result in opening the door controlled by

the module executing the access control functions (partition keypad, code lock, readers

expander).

59. TECHNICAL – AC LOSS – intended for control of devices working together with the alarm

control panel e.g. additional power supply units. Violation of the zone will cause a trouble

condition.

60. TECHNICAL – BATTERY LOW – intended for control of the batteries of additional power

supply units working in conjunction with the control panel. Violation of the zone will cause

a trouble condition.

61. TECHNICAL – GSM LINK TROUBLE – intended for control of the external GSM

communication module. Violation of the zone will cause a trouble condition.

62. TECHNICAL – OVERLOAD – intended for control of an additional power supply unit used

together with the control unit. Violation of the zone will cause a trouble condition.

63. TROUBLE – violation of the zone will cause a trouble condition.

64...79 BYPASSING – GROUP: 1–16 – violation of this type of zone can bypass a group

of zones (see: “Bypasses” p. 59).

80. ARMING – violation of the zone will arm the partition to which the zone belongs.

Additionally, you can select a group of partitions which will also be armed (see: “Groups of

partitions” p. 60).

81. DISARMING – violation of the zone will disarm the partition to which the zone belongs.

Additionally, you can select a group of partitions which will also be disarmed (see: “Groups

of partitions” p. 60).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info