Bedienungsanleitung Satel Integra 64 (Seite 89 von 114) (Englisch)

699075

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

SATEL INTEGRA 87

ASD-150 (ASD-250) – wireless smoke detector. You can configure:

 option to indicate alarm from other ASD-250 / ASD-150 detectors,

 option to send alarm to other ASD-250 / ASD-150 detectors.

ATD-100 (ATD-200) – wireless temperature detector. You can configure the temperature

threshold parameters for both positions occupied by the detector (which enables two

different temperature thresholds to be programmed):

 threshold type: high (when the temperature rises above the defined temperature,

alarm will be triggered) or low (when the temperature drops below the defined

temperature, alarm will be triggered),

 temperature,

 tolerance.

AVD-100 (AVD-200) – wireless shock detector and magnetic contact. You can:

 select the active reed switch of magnetic contact (not applicable to the AVD-200

detector, which does not have two reed switches) [first zone],

 configure the shock detector parameters [second zone]:

− sensitivity (registering a shock meeting the sensitivity criterion will trigger alarm),

− number of shocks, registering of which by the detector will trigger an alarm – the

shocks do not have to meet the sensitivity criterion (not applicable to the AVD-200

detector, which does not count the shocks).

Working parameters of the shock detector are independently analyzed. The detector

will report an alarm after a single strong shock caused by a heavy impact, as well as

after a series of weak shocks caused by a series of slight impacts.

ASP-105 – wirelessly triggered outdoor siren. You can configure:

 type of acoustic signaling,

 maximum duration of acoustic signaling.

ASP-205 (ASP-215) – wireless indoor siren. You can configure the signaling parameters

for both positions occupied by the siren (which enables two different types of signaling

to be programmed):

 maximum duration of signaling,

 type of acoustic signaling,

 optical signaling option.

ASW-100 (ASW-200) – wireless 230 V AC controller. You can select operating mode.

ASW-210 – flush-mounted wireless two-channel 230 V AC controller. You can select the

operating mode of the controller inputs.

9.2.1 Configuring the wireless devices – DLOADX program

Described below is how the additional parameters and options should be programmed in the

“Configuration” column.

ADD-200

Dusk sensor – enter a number from the 1 to 16 range to determine sensitivity (1 – minimum;

16 – maximum).

Temperature sensor – enter in turn:

• letter H (high temperature threshold) or L (low temperature threshold),

• number from a range of -30 to +70 (with 0.5 accuracy) to define temperature,

• number from a range of 0.5 to 10 (with 0.5 accuracy) to define tolerance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info