Bedienungsanleitung Satel MICRA (Seite 30 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

28 MICRA SATEL

information on the module status will be sent – as test transmissions – to the selected

telephone numbers (see: “Send SMS with module status to CLIP” option).

Write event for reporting – if this option is enabled, each test transmission will be written to

the event log. After enabling the option, you can send test transmissions to the monitoring

stations. The method of sending the event code (SMS, GPRS) depends on the rules

defined for each monitoring station in the “GSM telephone, Monitoring stations” tab. It is

necessary to define the event code to be sent.

Event codes for module test transmission

The table makes it possible to define the Contact ID codes which will be sent to the

monitoring stations for the module test transmission (the code will also be written to the

event log).

Format – the field displays information that the code is sent in the Contact ID format.

CODE – program 3 digits of the event code in this field. You can also make use of the

code editor. To open the code editor window, click on the button available in the

“EVENT” field.

R – select this field, if the event code is to denote new restore/arming (click on the field

twice to select/deselect it).

Part. – enter in this field the partition number which will be included in the event message

sent to the monitoring station.

Z. No. – enter in this field the zone number which will be included in the event message

sent to the monitoring station.

EVENT – the field displays description of the event whose code is entered in the “CODE”

field. A button , which opens the editor of Contact ID codes, is also available in the

“EVENT” field.

The test transmission will be sent as an event, if the following parameters and options

are programmed for the monitoring station:

 GPRS reporting (see section “Starting GPRS reporting”) or SMS reporting (see

section “Starting SMS reporting”) is activated,

 object identifier different from “0000” is programmed,

 reporting format is programmed,

 event code different from “000” is programmed.

Test transmissions to be sent to telephone numbers

The table allows you to define the form in which the test transmissions will be sent to the

telephone numbers programmed in the “GSM telephone, Monitoring stations” tab. Click

twice on the chosen field to select/deselect it (the field is selected if the “x” symbol is

displayed in it).

SMS – select this field, if the module test transmission is to be sent to the selected

telephone number in the form of SMS message.

CLIP – select this field, if the module test transmission for the selected telephone number

is to be realized with the use of CLIP service (the module will dial the programmed

number and then will be trying for 30 seconds to get through – the module telephone

number will be displayed in the telephone).

Do not answer any call from the module, if the CLIP test transmission is to be

effected without incurring any costs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info