Bedienungsanleitung Satel MICRA (Seite 31 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SATEL MICRA 29

CLIP settings

The table makes it possible to determine in detail how the CLIP test transmissions are to be

sent to the four telephone numbers programmed in the “GSM telephone, Monitoring stations”

tab. Click twice on the chosen field to select/deselect it (the field is selected, if “x” symbol is

displayed in it).

Acknowledgement – select this field if the module is to wait for the acknowledgement of

receipt of test transmission using the CLIP service. In order to acknowledge receiving the

CLIP test transmission, reject the call coming from the module.

Retries number – if the “Acknowledgement” field is selected, the test transmission with the

use of CLIP service can be conducted a specified number of times. Values from 1 to 15

can be programmed. Acknowledgement of the CLIP test transmission receipt will make the

module stop repeating such a transmission (e.g. if the test transmission is programmed to

be repeated 5 times, but it is already received at the first attempt, the module will not send

the other 4 transmissions).

-> SMS – if the “Acknowledgement” field is selected and receiving the CLIP test transmission

is not acknowledged, the module may send a “CLIP failed” SMS message to the selected

telephone number.

CLIP

CLIP starts test transmission – if this option is enabled, it is possible to send a test

transmission with the use of CLIP service. Call the module telephone number and after

hearing the dialing tone, hang up – the module will identify the telephone number of the

calling party and send a test transmission according to the preprogrammed settings.

Send SMS with module status to CLIP – if this option is enabled, it is possible to obtain

information about the module status with the use of CLIP service. Call the module

telephone number and after hearing the dialing tone, hang up – the module will identify the

telephone number of the calling party and send to that number an SMS message

containing the following information:

– module name;

– version of module software (version number and date of build);

– S0 ÷ S4 – current level of signal received by the antenna;

– P – current supply voltage value.

– Z1 ÷ Z4 – information on the status of Z1 ÷ Z4 zones:

i – digital / analog zone normal status,

I – digital zone violated,

L – voltage at analog zone has dropped below threshold L; information on voltage

value,

H – voltage at analog zone has exceeded threshold H; information on voltage value,

b – digital / analog zone blocked,

A – alarm,

a – alarm memory.

– TMP – information on status of TMP zone:

i – zone normal status,

I – zone violated,

b – zone blocked,

A – alarm,

a – alarm memory.

– Z6 ÷ Z13 – information on the status of Z6 ÷ Z13 zones:

i – zone normal status,

I – zone violated,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info