Bedienungsanleitung Satel MICRA (Seite 42 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

40 MICRA SATEL

The module is case-sensitive, hence the content of SMS messages for programming

the module settings should be entered in upper-case letters.

4.5 CONFIGURING THE MODULE TO WORK IN ALARM DEVICE MODE

1. Click the “Options, zones, outputs” tab and then:

– enable the “Alarm device” option;

– define the wired zone parameters (wiring type, sensitivity, restore and zone type),

– if delayed zones are used, define the entry delay time;

– if the exit delay countdown is to run, allowing you to leave the premises without

triggering alarm, define the suitable parameter;

– define the output parameters (output type, cut-off time);

– if the module users are to be authorized to remotely control the system by means of

SMS messages (arming/disarming, clearing alarms, bypassing/unbypassing zones,

controlling outputs), define the suitable control commands.

2. If the module is to be operated by means of keyfobs, click on the “Keyfobs” tab and add

the keyfobs (see: description of adding keyfobs, p. 34-34).

3. If the module is to be operated by means of the MKP-300 keypad, click on the “MKP-300

keypad” tab, register the device (see: Adding new wireless devices) and program it

accordingly (see: “MKP-300 keypad” tab).

4. Click on the “Reporting” tab and then enable the “Set CID codes automatically” option.

The codes will be automatically matched to corresponding events (see: description of the

“Set CID codes automatically” option, p. 32). Enabling the option is recommended not

only when event codes are to be sent to the monitoring station. The codes and their

descriptions are written to the event log, thus facilitating diagnostics.

5. If the module is to execute the reporting or messaging functions, configure suitable

parameters and options, as recommended in sections “Starting GPRS reporting”,

“Starting SMS reporting” and “Starting CLIP / SMS messaging”.

4.6 STARTING GPRS REPORTING

1. Enter the GPRS communication parameters (“GSM telephone, Monitoring stations” tab):

– Access Point Name (APN) for Internet GPRS connection;

– user name for Internet GPRS connection;

– password for Internet GPRS connection;

– DNS server IP address which is to be used by the module (the DNS server address

requires no programming, if the IP address is entered for the monitoring station).

2. Configure parameters of the monitoring station(s) (“GSM telephone, Monitoring stations”

tab):

– select the “GPRS” option;

– enter the monitoring station address (“Address (GPRS)” field);

– enter the number of TCP port through which communication with the monitoring station

will be effected;

– for the SATEL IP format, enter the encryption key for data to be sent to the monitoring

station (“Station key”);

– for the SATEL IP format, enter the GPRS key.

3. Define the protocol to be used by the module for sending event codes to the monitoring

station (“TCP/IP” or “UDP”).

4. Define the format to be used by the module for sending event codes to the monitoring

station (“SATEL IP” or “SIA-IP”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info