Bedienungsanleitung Satel MICRA (Seite 45 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SATEL MICRA 43

If the “SMS control only from list of telephone numbers for messaging” option (see

p. 22) is enabled in the module, the telephone number of the device with MICRA

CONTROL application must be on the “Telephone numbers for messaging and test

transmissions” list (see p. 26).

The appearance of the application and its way of operation depend on the version of

Android operating system.

If the GPRS reporting is active, the module response to commands may be delayed.

If the given function is not available (e.g. bypassing zones is impossible, when

the system is armed), the user will be informed about it by a suitable message.

6.1 FIRST LAUNCH OF THE APPLICATION

1. After launching the application, the system selection screen will be displayed. Bring up the

menu, using the function button of the device with MICRA CONTROL installed, and then

touch the “New” command.

2. In the menu that will be displayed, touch the “Name” command.

3. In the window that will open, enter the name of MICRA system to be operated by means

of the application. Touch the “OK” button. The window will close.

4. Touch the “Telephone number” command in the menu.

5. In the window that will open, enter the telephone number of MICRA module. Touch the

“OK” button. The window will close.

6. Touch the “Save” button. The programmed MICRA system will be displayed in the list.

If necessary, repeat the steps 1-6 to add next MICRA systems.

7. Touch one of the displayed MICRA systems. An SMS message will be sent to the MICRA

module. In reply, the module will send back, in the form of several SMS messages, the

configuration data required for remote control of the MICRA system using the application.

8. After the SMS messages with configuration data are received, the main screen for MICRA

system control will be displayed.

The downloaded configuration data are written to the memory of the device running

the MICRA CONTROL application.

9. Touch the button to get information on the current status of the system. An SMS

message will be sent to the MICRA module. In response, the module will send back

information on the system status in the form of SMS message.

10. You can proceed to control of the MICRA system.

6.2 SYSTEM SELECTION SCREEN

The first screen, which is displayed after starting the application, allows you to program basic

parameters of the MICRA system, which is to be operated by means of the application (see

section “First launch of the application”). You can program parameters of a few different

MICRA systems. After they have been programmed, a list of MICRA systems that can be

controlled will be available.

Touch one of the displayed MICRA systems to go to the main control screen of that system

(if this is the first touch, SMS messages will be exchanged to download the configuration

data).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info