Bedienungsanleitung Satel PERFECTA 16 (Seite 32 von 49) (Englisch)

699464

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

30 PERFECTA SATEL

Filter [1272.Filter] – time counted from the moment of receiving a transmission from the

detector. After it has elapsed and no other transmission is received, trouble will be

reported.

6.3.1 Wireless detectors and zone settings

Depending on the settings of the zone to which a wireless detector is assigned:

 NC, NO or EOL – the zone gives information about detector violation,

 2EOL/NC or 2EOL/NO – the zone gives information about detector violation and tamper.

The information on tamper and tamper restore is sent by the detector in real time.

How information about violation is sent depends on the detector operating mode:

normal – the detector sends information on violation and violation restore in real time (the

zone status corresponds to the detector status),

energy save (available in some detectors) – after sending information on violation, the

detector will not send any further information about violations for 3 minutes (the zone will

be violated for 2 seconds after the controller receives the transmission containing

information on detector violation).

7. Outputs

The system supports the following outputs:

 hardwired – on the control panel PCB and in the expander.

 wireless – in the PERFECTA 16-WRL or PERFECTA 32-WRL control panel. There are

4 outputs that support wireless sirens.

7.1 Output functions

0. N

OT USED

1. E

XTERNAL SIREN

– output activated by triggering burglary, panic or fire alarm. In the event

of the fire alarm, the output is pulsating.

2. I

NTERNAL SIREN

– output activated by triggering burglary, panic, fire or warning alarm. In the

event of the fire alarm, the output is pulsating.

3. B

URGLARY

– output activated after alarm is triggered by the 0. E

NTRY

XIT

, 1. E

NTRY

XIT

FINAL

, 2. I

NTERNAL

, 3. I

NSTANT

, 4. D

OUBLE KNOCK

or 5. 24

URGLARY

zone.

4. F

IRE ALARM

– output activated by triggering fire alarm from keypad or by the 10. 24

IRE

zone.

5. DURESS

ALARM

– output activated by using a code with D

URESS

right.

6. P

ANIC ALARM

– output activated by triggering panic alarm from keypad (loud or silent), by

the 7. 24

ANIC

or 8. 24

ANIC SILENT

zone.

7. MEDICAL

ALARM

– output activated by calling medical help from keypad or by the 9. 24

EDICAL

zone.

8. A

LARM

–

NOT VERIFIED

– output activated by triggering unverified alarm.

9. A

LARM

VERIFIED

– output activated by triggering verified alarm.

10. T

AMPER ALARM

– output activated by triggering tamper alarm.

11. F

IRE DETECTORS POWER SUPPLY

– output for power supply of fire detectors with automatic

alarm verification. The output is deactivated for 16 seconds after violation of the 10. 24

IRE

zone. If, after reactivation of the output, the zone will be violated again, fire alarm will

be triggered.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 16 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 16

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info