Bedienungsanleitung Satel VERSA 15 (Seite 40 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

38 VERSA SATEL

5. 24H BURGLARY – dedicated zone for the detectors which should be armed at all times (e.g.

glass break detectors).

6. 24H TAMPER – dedicated, permanently armed zone for tamper circuits. Violation of the zone

is additionally signaled as a trouble.

7. 24H PANIC – permanently armed zone, intended for operating the panic buttons.

8. 24H PANIC SILENT – permanently armed zone, intended for operating the panic buttons.

Alarm from the zone is not signaled on keypads, proximity card arm/disarm devices and

outputs, but the event code is sent to the monitoring station.

9. 24H MEDICAL – permanently armed zone for calling medical assistance.

10. 24H FIRE – dedicated, permanently armed zone for operating fire detectors.

11. DETECTOR MASK – permanently armed zone for antimasking control. Violation of the zone

is interpreted by the control panel as a detector trouble.

12. NO ALARM ACTION – the zone may be used to control the output with function 13. ZONE

VIOLATION

, 15. CONTROLLED or 16. READY STATUS. An additional option enables the zone

to be used for supervision of the key box (KEYBOX CONTROL option).

13. ARM/DISARM – the zone controls the arming status of the partition it belongs to. Violation of

the zone starts the arming procedure or disarms the partition (depending on the current

status of the partition).

14. ARMING – violation of the zone starts the procedure of arming the partition to which the

zone belongs.

15. DISARMING – violation of the zone disarms the partition to which the zone belongs.

16. EXIT DELAY TERMINATOR – violation of the zone ends the partition exit delay countdown.

17. SHUNT LOCK – the zone ends the partition exit delay countdown and – depending on the

BLOCKS VERIFICATION option – will disable verification or disarm the partition to which it

belongs. The way of controlling (the zone violation / zone restore) is determined by the

option RESTORE DISABLES VERIF. or RESTORE DISARMS.

18. ENTRY ROUTE ENABLING – violation of the zone activates delay for the 2. ENTRY/EXIT ROUTE

type zones in the partition to which the zone belongs. The zones will act as delayed ones for

the D

ELAY ACTIVATION TIME. After expiry of the time, unless the system is disarmed, the

zones will again act as the instant ones. If the DELAY ACTIVATION TIME for a zone will be

programmed as equal to 0, and at the same time the E

NTRY DELAY programmed for the

partition is equal to 0, violation of the zone will have no effect.

19. TROUBLE – violation of the zone is treated by the control panel as a trouble. Additionally,

an alarm event may be written into the control panel memory (see: E

VENT parameter).

6.5 Zone options

Alarm on exit delay end – when the option is enabled, if the zone is violated at the

moment of ending the exit delay countdown, it will trigger an alarm (if this option is

disabled, the zone will only trigger the alarm when the status changes from normal

to violation during the armed mode).

Priority – if the option is enabled, arming is impossible when the zone is violated.

Bypass disabled – if the option is enabled, the user cannot bypass the zone.

Active in night arm – if the option is enabled, the zone is armed when the night armed mode

is activated.

Active in day arm – if the option is enabled, the zone is armed when the day armed mode is

activated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info