Bedienungsanleitung Satel VERSA 15 (Seite 41 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 39

Power-up delay – if the option is enabled, the zone is bypassed for 120 seconds after

power supply is turned on (this will prevent triggering false alarms e.g. during start-up

of the control panel).

Warning in partial arming – if the option is enabled and the partition is set to day or night

arm mode, the zone will trigger a warning alarm. It can be signaled in the keypad, in the

proximity card arm/disarm device or at the 2. INTERNAL SIREN function output. It is not

reported to the monitoring station. If you do not disarm the system during the warning

alarm, the zone will trigger a burglary alarm (see: parameter WARNING TIME p. 32).

Warning alarm in the partial armed mode will work irrespective of the WARNING ALARM

global option, which refers to the delay of loud signaling and reporting if any mistakes

are made when entering into the protected facility.

Warning on internal sirens – if the option is enabled, warning alarm in the partial armed

mode is signaled on the output with the 2. INTERNAL SIREN function.

Signaling on internal sirens – option for the 19. TROUBLE zone type. If it is enabled, the

zone violation is indicated on the internal sirens.

Auto-reset 3 – if the option is enabled, the zone can trigger up to 3 alarms. As long as the

alarm is not cleared or the partition is not armed/disarmed, violations of the zone will not

trigger any alarm.

Auto-reset 1 – if the option is enabled, the zone can trigger only 1 alarm. As long as the

alarm is not cleared or the partition is not armed/disarmed, violations of the zone will not

trigger any alarm.

If the AUTO-RESET 3 and AUTO-RESET 1 options are enabled at the same time, the

AUTO-RESET 3 option will have priority.

Clearing Autoreset – if the option is enabled, the alarm counters for zones for which the

AUTO-RESET 3 or AUTO-RESET 1 option is enabled will be automatically reset at midnight

(violations of these zones will be able to trigger alarms again).

Armed if one part. armed – the option refers to the zones which are assigned to both

partitions. If the option is enabled, the zone is armed when one of the partitions is armed. If

the option is disabled, the zone is armed when both partitions are armed. The option is

also available in the event of ubypassing zones during disarming (if the option is enabled,

the zone will only be unbypassed after disarming both partitions).

Blocks verification – an option for the 0. E

NTRY/EXIT, 1. ENTRY/EXIT FINAL and 17. SHUNT

LOCK

zone types. If it is enabled, the zone will block alarm verification in the partition:

– after the zone violation – the 0. E

NTRY/EXIT and 1. ENTRY/EXIT FINAL zone types, and

also the 17. S

HUNT LOCK zone type, when the RESTORE DISABLES VERIF. option is

disabled,

– after the zone restore – the 17. SHUNT LOCK zone type, when the RESTORE DISABLES

VERIF

. option is enabled.

In case of the 17. SHUNT LOCK zone type, the zone will disarm the system when the

BLOCKS VERIFICATION option is disabled.

Restore disarms – an option for the 17. SHUNT LOCK zone type. If the option is enabled,

the zone restore will disarm the partition to which the zone belongs, and the zone

violation will shorten the exit delay time. If the option is disabled, the zone violation

will disarm the partition, and zone restore will shorten the exit delay time. The option

is available, if the BLOCKS VERIFICATION option is disabled.

Restore disables verif. – an option for the 17. SHUNT LOCK zone type. If the option is

enabled, the zone restore will block verification in the partition to which the zone belongs,

and the zone violation will shorten the exit delay time. If the option is disabled, the zone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info