699458
51
Zoom out
Zoom in
Vorherige Seite
1/87
Nächste Seite
SATEL VERSA 49
LED keypad – by means of LEDs in the lower line of LEDs.
Chime on/off – if this option is enabled, the chime signal can be turned on/off by means of
the key (the key is to be pressed for about 3 seconds).
Quick control – if this option is enabled, the users can control the outputs by using the
number keys. The 15. CONTROLLED outputs must be assigned to the keys (see: “Quick
control of outputs” p. 46).
Sign. new trouble [New trbl.signal.] – if this option is enabled, the keypad will audibly signal
occurrence of any new trouble (additionally, the TROUBLE MEMORY UNTIL REVIEW option
must be enabled in the control panel – see: “Global options” p. 27). The signaling will be
turned off after reviewing the trouble with the SYSTEM STATE user function. The new
troubles will not be signaled, if the GRADE 2 option is enabled in the control panel.
Auto-Arm delay countdown [Autoarm signal.] – if this option is enabled, the auto-arm delay
countdown is signaled acoustically (not applicable to the LED keypads).
Arm mode review [Arm mode check.] – if this option is enabled, holding down the key
for about 3 seconds will display information on the partition status. The users cannot check
the partition status using the key, if the GRADE 2 option is enabled.
Alarms
FIRE alarm – if this option is enabled, pressing the key for approx. 3 seconds will
trigger the fire alarm.
AUX. alarm [Medical alarm] – if this option is enabled, pressing the key for approx. 3
seconds will trigger the auxiliary (medical) alarm.
PANIC alarm – if this option is enabled, pressing the key for approx. 3 seconds will
trigger the panic alarm.
silent [Silent panic] – if this option is enabled, the panic alarm triggered from the keypad will
be a silent one (without loud signal). The option is available, if the PANIC ALARM option is
enabled.
Alarm 3 incorrect codes [3 wrong codes] – if this option is enabled, entering incorrect code
three times will trigger the alarm.
Alarm messages
Partitions [Part.alarm msg.] – if this option is enabled, messages on partition alarms will be
displayed (they contain the name of partition).
Zones [Zone alarm msg.] – if this option is enabled, messages on alarms from zones will be
displayed (they contain the name of zone). The zone alarm messages have the priority.
The messages are presented on the display of LCD keypad.
The messages will not be displayed, if the GRADE 2 global option is enabled.
8.2.2 Volume
The volume level for different events is configurable in the case of VERSA-LCDM,
VERSA-LCDR and VERSA-LCDM-WRL keypads.
Volume – volume level of the beeps generated during keypad operation (key pressing,
confirmation of performed operation, etc.).
Chime – volume level of the beeps generated after zone violation (CHIME).
Entry delay – volume level of the entry delay beeps.
Exit delay – volume level of the exit delay beeps.
Fire alarm – volume level of the fire alarm beeps.
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel VERSA 15 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel VERSA 15

Satel VERSA 15 Zusatzinformation - Deutsch - 11 seiten

Satel VERSA 15 Bedienungsanleitung - Deutsch - 44 seiten

Satel VERSA 15 Installationsanweisung - Deutsch - 37 seiten

Satel VERSA 15 Kurzanleitung - Deutsch - 2 seiten

Satel VERSA 15 Kurzanleitung - Englisch - 11 seiten

Satel VERSA 15 Installationsanweisung - Englisch - 36 seiten

Satel VERSA 15 Bedienungsanleitung - Englisch - 32 seiten

Satel VERSA 15 Bedienungsanleitung - Englisch - 42 seiten

Satel VERSA 15 Kurzanleitung - Holländisch - 11 seiten

Satel VERSA 15 Bedienungsanleitung - Holländisch - 44 seiten

Satel VERSA 15 Kurzanleitung - Holländisch - 2 seiten

Satel VERSA 15 Zusatzinformation - Holländisch - 86 seiten

Satel VERSA 15 Installationsanweisung - Holländisch - 35 seiten

Satel VERSA 15 Kurzanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info