Bedienungsanleitung Satel VERSA 15 (Seite 53 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 51

Arming

Card hold-down – if you select this option, the user will have to bring the card close to the

keys and hold it still for about 3 seconds to arm the system.

Card read – if you select this option, the user will only have to bring the card close to the

keys to arm the system.

When configuring the keypad by using functions available in the service mode, use the

PROX.CARD - ARMS option to define how to arm the system using the proximity card

(option enabled = CARD READ; option disabled = CARD HOLD-DOWN).

Card hold-down control outputs

If you have selected the CARD READ option, you can permit the users to toggle the

15. CONTROLLED type outputs (the output status will change after the card is brought close to

the keys and held still for about 3 seconds). Select the outputs the users will be allowed to

control.

8.3 Ethernet module

The parameters and options, as described below, apply to the ETHM-1 Plus module

with firmware version 2.04.

DLOADX

DLOADX->ETHM-1 connection [DLOADXETHM-1] – if this option is enabled, it is

possible to initiate connection with the control panel via Ethernet from the DLOADX

program.

DLOADX server – address of the computer with DLOADX program. If the computer is not in

the same local network as the control panel, it must be a public address. You can enter

either the IP address or the domain name.

Port – number of the TCP port used for communication between control panel and

a computer with DLOADX program via Ethernet. You can enter values from 1 to 65535.

Default value: 7090.

DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special

characters) which is used for data encryption during communication between control panel

and computer with DLOADX program via Ethernet.

SATEL service

LAN [SATEL server LAN] – if this option is enabled, the control panel connects to the SATEL

server via the Ethernet module, while the SATEL server makes it possible to establish

communication with the control panel. For communication vie the SATEL server, you do

not need to additionally configure the network device through which the module connects

to the public network.

For establishing communication with the SATEL server, the DNS server must be used.

For communication via the SATEL server, the ports of 1024-65535 range are used as

outgoing ports. These ports must not be blocked.

Do not report SATEL server connection trouble [No SATEL trbl.] – if this option is

enabled, loss of communication with the SATEL server will not be reported.

Communication with mobile application [Mobile app.] – if this option is enabled,

communication with the control panel can be established from the mobile application. The

option is available if the LAN option is enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info