Bedienungsanleitung Satel VERSA 15 (Seite 55 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 53

QR-code – pressing the button will display the “QR-code” window. The window shows the

QR code containing information required when configuring settings of the VERSA

CONTROL application. You can read the QR code by using a mobile device or export to

file and transmit to the users. The QR code facilitates configuring the VERSA CONTROL

application settings.

Refresh – pressing the button will update information presented in the MAC, ID and IP fields.

Time from a time server

LAN [Time from srvLAN] – if the option is enabled, the control panel clock will be

synchronized with the time server once a day.

For communication with the time server, the DNS server must be used.

Time zone – difference between the universal time (GMT) and the zone time. The parameter

is required, if the control panel clock is to be synchronized with the time server.

8.3.1 LAN

Obtain IP address automatically (DHCP) [DHCP] – if this option is enabled, the module will

automatically download data on IP address, subnet mask and gateway from the DHCP

server (in such a case, you do not have to program these parameters).

The IP address assigned to the module can be read in the LCD keypad using the

MODULE VER. user function available in the TESTS submenu. For a detailed description

of the function please refer to the user manual for the control panel.

IP address – module IP address.

Subnet mask – the mask of the subnet in which the module is working.

Gateway – IP address of the network device through which the other devices in the local

network can communicate with devices in other networks.

Obtain DNS server address automatically [DHCP-DNS] – if this option is enabled, the

DNS server IP address is downloaded automatically from the DHCP server. The option is

available, when the OBTAIN IP ADDRESS AUTOMATICALLY (DHCP) option is enabled.

DNS server – IP address of the DNS server which is to be used by the module. It can be

programmed, if the O

BTAIN DNS SERVER ADDRESS AUTOMATICALLY option is disabled.

PING test

Address to test [PING] – address of the device to which a ping command to test

communication is to be sent by the module. You can enter IP address or domain name.

Period [PING period] – the time interval between successive communication tests using the

ping command. If value 0 is programmed, the communication test is disabled.

Tries no. before trouble [PING tries] – the number of failed communication tests (the

module received no answer to the ping command sent), after which the trouble will be

reported. If value 0 is programmed, the communication test is disabled.

8.4 ABAX wireless system controller

8.4.1 Parameters and options of the controller

Response period – communication with wireless devices takes place in specified intervals.

The controller is then gathering information on the status of wireless devices and, if

necessary, sending commands to the devices, e.g. switching the detectors to their

active/passive state, switching on/off the test mode and/or changing configuration of the

devices. The response period can be 12, 24 or 36 seconds. The less often communication

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info