Bedienungsanleitung Satel Versa Plus (Seite 23 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

SATEL VERSA Plus 21

Control panel settings

You can configure the modem communication settings:

 when programming the global parameters (see: “Global parameters” p. 32).

 when programming the built-in communication modules (see: “Built-in communication

modules (VERSA-ETH)” p. 54).

Description of parameters

Telephone numbers

Descriptions displayed on the LCD keypad are shown in square brackets.

Panel’s tel. no – telephone number of the control panel.

PC phone number [DLOADX tel.] – telephone number of the modem connected to computer

with DLOADX program installed. The number for modem communication via the built-in

analog telephone communicator.

Phone number for GSM [DLOADX GSM] – telephone number of the modem connected to

computer with DLOADX program installed. The number for modem communication via the

built-in GSM communicator.

DLOADX program settings

You can define two sets of parameters for the modem connected to computer, suitable for

the communication method:

 analog modem for 300 bps transmission,

 analog or GSM modem for CSD transmission.

After clicking on the button you can configure the selected set of parameters (see:

“Configuring the modem connected to computer”).

Dialing – the method of dialing numbers by the modem connected to computer (tone or

pulse).

Dial tones control – if option is enabled, the modem connected to computer will detect the

dial tone or busy signal before dialing the number.

Speaker – operating mode of the modem speaker. The speaker can be always OFF, or ON

until connection with the control panel is established (auto), or always ON.

Volume – volume of modem speaker.

Answering – how the DLOADX program reacts when the control panel is connecting to the

program. Communication can be established automatically after a preset number of rings,

or the program will only indicate an attempt to establish communication by the control

panel (communication will only be established after clicking on the “Answer” button).

Double call – you can define duration of the pause between the first and the second call, if

the control panel is set to go off-hook after the second call.

Configuring the modem connected to computer

You can edit the parameters after clicking on the “Change” button.

Port RS-232 – computer COM port to which the modem is connected.

Modem – list of modems, the parameters of which are defined. The list of modems and their

settings will be written to disk in the “modem.ini” file.

Baud Rate – transmission rate of the serial port. It is recommended that the highest rate

acceptable by the modem be set (only some modems may require the 300 bps setting in

order to enforce operation with exactly this speed).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info