Bedienungsanleitung Satel Versa Plus (Seite 34 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

32 VERSA Plus SATEL

DLOADX program settings:

 enter the individual identification number of the control panel for the purpose of

communication via the SATEL server,

 enter the MAC address of built-in Ethernet module,

 program the data encryption key.

1. Click on the button in DLOADX program main menu. A drop down menu will be

displayed.

2. Click “TCP/IP: Satel server”. The “Connection TCP/IP: DLOADX<->VERSA Plus” window

will be displayed.

3. Click on the “Connect” button in the “Connection TCP/IP: DLOADX<->VERSA Plus”

window. Connection establishment information will be displayed.

4. When communication is established, the DLOADX program will inform you about it.

4. Global parameters

4.1 Programming the global parameters

You can program the global parameters:

 DLOADX program: “Global parameters” window.

 keypad: functions available in the GLOBAL PARAM. submenu (SERVICE MODE 3. GLOBAL

PARAM

.).

4.2 Global options

Reporting – TELEPHONE – if the option is enabled, the control panel can send event codes

to the monitoring station by means of the telephone line.

Reporting – ETHM/GSM – if the option is enabled, the control panel can send event codes

to the monitoring station over Ethernet, via GPRS, using CSD technology, using SMS

messages and over GSM voice channel.

Telephone messaging – if the option is enabled, the control panel can notify about the

occurrence of specific events by means of voice or text messages using the phone

communicator.

Answering – modem – if the option is enabled, external initiation of the modem

communication with the control panel is possible.

Double call – the option applies to the analog telephone communicator. If enabled, you must

call the control panel twice to be connected. The first time, wait for the preset number of

rings and then hang up. Then call again within three minutes and the control panel will

answer the call immediately. This solution makes it possible to connect after the control

panel some additional devices which will be activated after a preset number of rings (e.g.

answering machine, fax, etc.).

Tone dialing – the option applies to the analog telephone communicator. If enabled, the

control panel will tone dial the telephone numbers (pulse dial, if this option is disabled).

Pulse 1/1.5 (off 1/2) – this option applies to pulse dialing. Before you enable it, make

yourself familiar with the valid standard of pulse dialing.

No dial tone test – the option applies to the analog telephone communicator. If enabled, the

control panel will not perform the test for dial tone before dialing the number and will start

dialing the number 5 seconds after going “off hook”. This makes it possible for the control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info