Bedienungsanleitung Satel Versa Plus (Seite 35 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

SATEL VERSA Plus 33

panel to dial the number when some non-standard tones occur on the telephone line after

going off hook (e.g. interrupted tone). When this option is disabled, the control panel will

start dialing the number 3 seconds after going off hook, provided that the dial tone is

present.

No answer tone test – the option applies to the analog telephone communicator. If

enabled:

voice messaging: the voice message is played back 8 (first round) or 16 (next rounds)

seconds after completion of number dialing (the control panel does not check whether

the line is off-hook),

reporting: the control panel will ignore any signals (including the busy tone) received

from the telephone exchange after dialing the telephone number, and will wait for

the handshake from the monitoring station.

Enable this option if, after dialing the number, non-standard signals are received from

the telephone exchange or in case of very poor quality connections.

Store keyfob events – if the option is enabled, using the keyfob is written into the event log.

Trouble memory until review – if the option is enabled, the trouble memory is being

signaled until it is cleared (clearing the trouble memory is possible when you quit the

7. SYSTEM STATE user function).

Grade 2 – if the option is enabled, the system operates in accordance with the EN 50131

standard requirements for Grade 2, i.e.:

– the way of informing the users about the system state by means of LEDs, display and

beeps in the keypads meets the requirements of the standard (see: USER MANUAL),

– the quick arming from keypad (without entering the code) is not available,

– new codes in the system must be composed of at least 5 characters,

– prior to arming, the control panel checks that no circumstances have occurred that

prevent arming (ref. PREVENT ARMING IF NOT READY global option),

– in case of arming by means of the LCD keypad, the control panel will check if there are

any zones bypassed in the partition – information on the bypassed zones is presented,

if the user has the INSPECTION right,

– the warning alarm feature is enabled in the system (see: W

ARNING ALARM global option),

– the warning alarm is signaled at the 2. I

NTERNAL SIREN function output (ref. WARNING

ALARM ON INTERNAL SIRENS

global option).

You can enable/disable the option in keypad: S

ERVICE MODE 2. HARDWARE 1. KPDS &

EXPS

. 4. OPTIONS GRADE2.

Serial data on OUT 3/4 – if the option is enabled, OUT3 and OUT4 outputs send the system

status data (zone alarms, fire alarms, troubles, armed modes, etc.) and do not execute any

other programmed functions. The outputs may be used to control the NR2-DSC radio

monitoring transmitter (NEMROD system – PC-16 OUT format), made by NOKTON.

OUT 3/4 data extended mode – if the option is enabled, the OUT3 and OUT4 outputs will

send the system status data in the form of frames (PC-16 OUT UA format). The option is

available, if the S

ERIAL DATA ON OUT 3/4 option is enabled.

Arm./Disarm./Clear. signaling from zones only – if the option is enabled, outputs with the

functions 1. EXTERNAL SIREN and 2. INTERNAL SIREN with enabled ARM/DISARM/CLEAR SIGN.

option will signal only:

– starting of the arming procedure by zone or by means of keyfob,

– no possibility of arming (see: PREVENT ARMING IF NOT READY option or GRADE 2 option), if

the arming command has been sent from keyfob,

– failed attempt of arming by means of keypad or keyfob (see: PREVENT ARMING IF NOT

READY

option or GRADE 2 option),

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info