Bedienungsanleitung Satel Versa Plus (Seite 37 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

SATEL VERSA Plus 35

Information on sending next test transmissions is not recorded. Any other event occurring

in the system will reset the counter, i.e. it will be possible to log next three consecutive test

transmissions.

Backlight off on AC loss – when the option is enabled, the backlighting in keypads is

automatically switched off in case of 230 V AC power loss.

Answering/remote control when armed partition 1 / 2 – if the option is enabled, telephone

answering and remote control features are only available when selected partitions are

armed.

Additionally, the list of global options in the keypad includes:

 TMP ALARM IN P.2 – alarm from the mainboard TMP zone is signaled in partition 2.

In the DLOADX program, the partition in which alarm from TMP zone will be

signaled is to be selected in the “VERSA – Structure” window, “Hardware” tab, after

clicking on the system name on the left side,

 EVENTS LIMITAT., EXP. RESTART. REP., REST. AFT. BELL and REST. AFT. DISARM. –

options available in the DLOADX program, “VERSA – Reporting” window, and

described in section “Reporting parameters and options” (p. 78).

4.3 Global times

Keypad’s alarm time – time period during which alarm is signaled in keypads and proximity

card arm/disarm devices. Up to 255 seconds can be programmed. Programming the value

0 means that the KEYPAD’S ALARM TIME will be 3 seconds.

No armed indication after – time counted from the moment of partition arming, after expiry

of which the keypad LED indicating the partition armed status will go out. Up to 255

seconds can be programmed. Programming the value 0 means that the LED will be lit as

long as the partition is armed.

AC loss report delay – time during which the control panel must be without AC power

before the trouble is reported. A delay in reporting the trouble prevents sending information

about short-time voltage decays, having no effect on normal operation of the system. The

trouble reporting delay can be up to 255 minutes.

Tel. line loss report delay – time during which abnormal voltage must be on the telephone

line for the control panel to report the telephone line trouble. A delay in reporting the

trouble prevents sending information about short-time voltage dips (e.g. during a phone

call) or decays. The trouble reporting delay can be up to 255 minutes.

RTC clock correction – if the accuracy of control panel clock is inadequate, the clock

settings may be adjusted once per 24 hours (at midnight) by a defined time. The maximum

correction can be ±19 seconds per 24 hours.

Summer/winter time – the control panel can automatically adjust the clock settings due to

a change from the summer time to the winter time and vice versa. The following correction

schemes are available:

– no correction,

– according to the European Union rules,

– according to the United States' rules,

– correction by 1 hour according to dates,

– correction by 2 hours according to dates.

Summer time from / Winter time from – if the control panel clock is to be corrected by 1 or

2 hours according to dates, you should enter the dates (day, month) after the clock is

changed to the summer time (moved forward) or to the winter time (moved back).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info