Bedienungsanleitung Satel Versa Plus (Seite 38 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

36 VERSA Plus SATEL

4.4 Arming

Prevent arming if not ready – when the option is enabled, if the user arm the system by

means of keypad or keyfob, the control panel checks that there are no circumstances that

prevent the arming:

– a zone with PRIORITY option is violated in the partition which is to be armed,

– the 3. INSTANT, 4. DOUBLE KNOCK, 5. 24H BURGLARY, 6. 24H TAMPER, 7. 24H PANIC, 8. 24H

PANIC SILENT

, 9. 24H MEDICAL or 10. 24H FIRE type zone is violated in the partition which

is to be armed,

– there is a trouble in the system.

If one of the aforementioned situations takes place, the control panel will not start the

arming procedure (the LCD keypad enables forced arming – see: USER MANUAL). If none of

the conditions is met, the control panel will start the arming procedure, but at the end of

the exit delay countdown it will check again if the arming is possible (the quick arming

being an exception). A violated zone or a trouble mean that the arming is not possible (i.e.

the arming procedure will fail).

Additionally, when the option is enabled and the user has the INSPECTION right, the LCD

keypad will inform, prior to arming, that there are bypassed zones in the partition (it does

not apply to the quick arming).

You can enable/disable the option in keypad: SERVICE MODE 2. HARDWARE 1. KPDS &

EXPS

. 4. OPTIONS ADVANCED ARMING.

Arm even if not ready after exit delay – if the option is enabled, a zone violation or trouble

found at the end of exit delay countdown does not affect the arming procedure – the

system will be armed. You can enable/disable the option in keypad: SERVICE MODE

2. HARDWARE 1. KPDS & EXPS. 4. OPTIONS ARM EXDLY W.TRBL. The option is

available, when the PREVENT ARMING IF NOT READY or GRADE 2 option is enabled.

4.5 Other global parameters

Rings before answer – number of rings after which the control panel will answer the

incoming call. The parameter refers to the analog communicator. In the keypad, you can

program this parameter: SERVICE MODE 7. ANSWERING 1. RINGS TO ANS.

User code min. lenght – the minimum number of characters required for the control panel to

accept a new code or a changed code. This parameter will be included when creating and

editing the codes (it is irrelevant to the codes already existing in the system).

5. Partitions

The partition is a separated area within the premises protected by the security alarm system.

The subdivision into partitions enables arming/disarming the system only in part of the

protected area, as well as limiting access to some portion of the premises to selected users.

You can create 2 partitions.

5.1 Configuring the partitions

You can configure the partitions as follows:

 DLOADX program: “VERSA – Structure” window “System” tab. Partitions and zones are

presented in the form of tree structure on the left side of the window (Fig. 6). Click on the

partition you want to configure.

 keypad: functions available in the PARTITIONS submenu (SERVICE MODE 1. PARTITIONS).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info