Bedienungsanleitung Satel Versa Plus (Seite 40 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

38 VERSA Plus SATEL

Using the keypad, you can arm the system without the exit delay, if the hold down

the key which ends the arming sequence ( , or ) for approx. 3

seconds.

Infinite exit delay – if the option is enabled, the partition exit delay can only be ended by

means of the 1. ENTRY/EXIT FINAL, 16. EXIT DELAY TERMINATOR or 17. SHUNT LOCK type

zones. If the exit delay countdown is not completed, the armed mode will not be activated

(only the 3. INSTANT type zones will be armed).

Entry delay – the time counted from the moment of entry into the protected area which

enables the partition to be disarmed before triggering an alarm. This parameter

applies to the 0. ENTRY/EXIT and 1. ENTRY/EXIT FINAL type zones. The delay

programmed for the partition is taken into account in case of the zones for which the

value 0 has been individually programmed. The delay is programmed in seconds. Up

to 255 seconds can be programmed. If the value 0 is programmed, the zone will act

as an instant one.

Warning time – the time of warning alarm signaling for the partial armed mode (see:

WARNING IN PARTIAL ARMING zone option). The time is programmed in seconds. Up to 255

seconds can be programmed. If the value 0 is programmed, the WARNING TIME will be 30

seconds. After expiry of the WARNING TIME, unless the partition is disarmed, the burglary

alarm will be triggered.

The WARNING TIME parameter does not apply to the time of signaling the warning alarm

which is generated when mistakes are made when entering into the protected object

(see: WARNING ALARM global option).

Verification time – programming a value different from 0 means activating the alarm

verification feature in the partition. Subject to verification are alarms from 0 to 5 type

zones. The VERIFICATION TIME runs from the moment of alarm being triggered by such a

zone. If during the VERIFICATION TIME an alarm is triggered by another zone in the partition,

programmed as 0 to 5 type, the control panel will report a verified alarm. The time is

programmed in minutes. Up to 255 minutes can be programmed.

Entry delay in Day Arm – with this option enabled, after partition is armed in day mode with

no delay, the entry delay time remains valid (there is only no exit delay time). With this

option disabled, after partition is armed with no delay, there is neither exit delay nor entry

delay time.

Entry delay in Night Arm – with this option enabled, after partition is armed in night mode

with no delay, the entry delay time remains valid (there is only no exit delay time). With this

option disabled, after partition is armed with no delay, there is neither exit delay nor entry

delay time.

Auto-arming delay – the time counted from the moment when the timer is to arm the

partition, enabling the arming to be deferred. The delay time is programmed in seconds.

Up to 255 seconds can be programmed. Programming the value 0 means that the arming

deferment will be unavailable.

Deferment time – the time by which the user can defer arming by the timer. The time is

programmed in minutes. Up to 255 minutes can be programmed. Programming the value 0

means that the arming deferment will be unavailable.

Simple deferment – if the option is enabled, the user can defer auto-arming by pressing the

key twice during the auto-arm delay time countdown.

Single deferment – if the option is enabled, the user can only use the simple deferment

once, so as to postpone the auto-arming. Subsequent arming deferments are only

possible by using the A-ARM DEFER. user function ([CODE] 6. SETTINGS 1. A-ARM

DEFER

.).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info