Bedienungsanleitung Satel Versa Plus (Seite 58 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

56 VERSA Plus SATEL

Alarm 3 incorrect codes (mobile application) [Al.3 wrong codes] – if this option is enabled,

entering an invalid code three times from the VERSA CONTROL application will trigger an

alarm.

Push notifications – if this option is enabled, the VERSA CONTROL application can provide

information about alarm system events by means of push notifications.

MAC – information on module hardware address.

ID – information on individual identification number for the purpose of communication via the

SATEL server (programming by means of DLOADX program, operating by means of

VERSA CONTROL application). The ID number is assigned automatically by the SATEL

server.

If the control panel is to be used in another alarm system, the hitherto used ID number

must be deleted. It can be done from the keypad, when programming the built-in

communication modules, in the last step, if the control panel is connected to the

SATEL server. Having deleted the old ID number, the control panel will receive a new

one. The VERSA CONTROL applications using the old ID number will be unable to

connect to the control panel.

IP – information on the module local / public address.

QR-code – pressing the button will display the “QR-code” window. The window shows the

QR code containing information required when configuring settings of the VERSA

CONTROL application. You can read the QR code by using a mobile device or export to

file and transmit to the users. The QR code facilitates configuring the VERSA CONTROL

application settings.

Refresh – pressing the button will update information presented in the MAC, ID and IP fields.

Time from a time server

LAN (LAN) [Time from srvLAN] – if the option is enabled, the control panel clock will be

synchronized with the time server once a day through the Ethernet module.

For communication with the time server, the DNS server must be used.

GSM [Time from srvGSM] – if the option is enabled, the control panel clock will be

synchronized with the time server once a day through the GSM module (GPRS).

If the LAN and GSM options are enabled at the same time, time synchronization via

the Ethernet module has priority. Time synchronization by means of the GSM module

will take place only if an attempt to synchronize time via the Ethernet module fails.

Time from GSM network [Time from GSMnet] – if the option is enabled, the control panel

clock is synchronized with the time of GSM network operator.

Synchronizing the clock with the GSM network time has the top priority. Only if

synchronization with the GSM network time fails will the clock be synchronized with

the time server.

Time zone – difference between the universal time (GMT) and the zone time. The parameter

is required, if the control panel clock is to be synchronized.

9.2.1 Ethernet communication module (ETHM)

ETHM (LAN) [Use ETHM] – if the option is enabled, the built-in module is supported by the

control panel. The option should be disabled, if the module is not to be used. Disabling the

option will prevent the unnecessary reporting of troubles related to this module.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info