Bedienungsanleitung Satel Versa Plus (Seite 90 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

88 VERSA Plus SATEL

Code – 4 digits which, if entered using the telephone keys, will acknowledge receipt of the

voice notification and clear telephone messaging of the event.

By means of the MSG.CLR.CODES user function ([code] 6. SETTINGS

5. MSG.CLR.CODES), the users having the PROGRAMMING right can edit the codes for

acknowledging / clearing notification.

User – the user assigned to the phone number. If the user has the INT-VG ACCESS right, he

will get automatically access to the voice menu after acknowledging the voice notification.

12.1.3 Event assignment

Specify for the events, the occurrence of which is to be notified by the control panel:

 telephone numbers that will be notified,

 number of the message to be sent. You can assign the text message number to an event.

In the case of voice notifications, the voice message assigned to that text message will be

used.

12.1.4 SMS/Pager messages

You can program up to 64 text messages that will be used for PAGER or SMS notification.

You can assign a voice message to each text message. The built-in voice module can play

back up to 16 voice messages. You can synthesize the voice messages using the VG-SOFT

program (see: “VG-Soft program and voice module configuring” p. 99). The text messages

are numbered from 1 to 64. The voice messages are numbered from 0 to 15. The same voice

message can be assigned to several text messages.

For PAGER messaging, define the pager identification parameters.

12.1.5 Starting the telephone messaging

1. Enable the TELEPHONE MESSAGING option (see: “Global options” p. 32).

2. Define the number of attempts made by the control panel to notify about the event

(parameters ROUND COUNT and RETRIES NO. FOR ONE ROUND).

3. Enter the phone numbers that are to be notified, and description of those phone numbers.

4. Specify, of which events, which phone numbers and by means of which messages the

control panel is to notify (remember that a text message number is assigned to each

event, and the voice message assigned to that text message will be used for voice

notification).

5. Determine whether alarm clearing should cancel the messaging (global option CLEAR

MESSAGING ON ALARM CLEARING

PAGER messaging

1. Select PAGER1 or PAGER2 as the messaging type for the phone number to be notified.

2. Enter the content of messages that are to be used for notification.

3. Define the pager identification parameters.

4. Configure the global options related to analog telephone communicator:

– determine how the telephone numbers should be dialed (T

ONE DIALING; in case of the

pulse dialing option – PULSE 1/1,5 (OFF 1/2)),

– determine whether the control panel, prior to dialing the number, should check the

telephone line for dialing signal (NO DIAL TONE TEST),

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info