Bedienungsanleitung Satex . . SA 250 (Seite 3 von 20) (Englisch)

50953

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

pag. 1

Manual SA 250

PCG/C SA 250 Manual 27-03-07

General

Thank you for purchasing this SATEX precision balance !

This scale is equipped with reliable technology and has user friendly operational software.

You will use it many times and it will prove itself to be an easy, speedy and accurate tool.

If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,

have a look at our website : www.satex.nl

or send your questions per email to : info@satex.nl

Application, Weight and Measures certified

The SA 250 platform scale balance is designed for accurate and legal weighing, for counting of articles and

for check weighing and filling with settable weight setpoints with LED indicators in the front panel.

The scale is designed for use in dry, inside conditions. The weigh platform is equipped with an IP 65 water-

and dust tight HBM off centre loadcell..

Take care of a stable position of the scale. Place it in accurate level position with the help of the 4 leveling feet

and the level indicator down below the pole. Important : all 4 of the feet should carry the scale equally.

The CE (OIML R76 1992 class III) Certificate of this scale is valid in all European countries.

It is permitted to use the scale, if stamped individually, for weighing for trade purposes. However there is no

difference between the accuracy of a stamped or not stamped scale. Even if the scale has been purchased

without the legal stamping, it may be stamped later on, if the scale still is in good condition.

Safety

Please read this manual thoroughly before start using the scale.

The supplier does not accept any responsibility if the guidelines of this manual are not observed.

Before any work is done on the scale, power connections from the mains adaptor and the internal battery should

be interrupted. Warranty is void if the scale is opened anyhow.

Breaking of the seal of a stamped scale is a criminal act and causes the complete disapproval of the scale.

The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for

electromagnetic compatibility and the Council Directive 90/384/EEC for not automatic weighing machines. Exceeding

of the maximum values, laid down in these regulations, must be avoided.

Electrostatic discharges may cause fatal damage to the scale and should be avoided

at all times. I.e. a proper earth connection of the scale and the place of erection is required in such cases.

The mains adaptor has no special protection against humidity and water and should not come into contact with it.

In case this has happened, or the adaptor shows any external damage, the adaptor should not be used any longer.

The built in lead battery should, if it has to be replaced, be disposed off as small chemical waste, not to be added to

normal waste.

Maintenance

Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance

is not required. The stainless steel platform plate may be removed to clean the inside of the weigh platform.

However it makes sense to check the scale’s weighing accuracy with regular intervals, using accurate calibration

weights.

Stamped scales are sealed, but a not stamped scale may be adjusted by the user itself using accurate Class M1

weights.

WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30

Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60

3892 DA ZEEWOLDE The Netherlands

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satex . . SA 250 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satex . . SA 250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info