Bedienungsanleitung Scan 66 series (Seite 32 von 36) (Englisch)

745567

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Checking the stove

Scan A/S recommends that you check your stove thoroughly after

sweeping/cleaning. Check all visible surfaces for cracks. Check that

all joints are tight and that the seals sit correctly. Worn or deformed

seals should be replaced.

Servicing

We recommend that the stove should have a comprehensive servicing

at least once every two years. Servicing should include the following:

• Lubricate hinges using copper grease

• Check gaskets. Replace any that are broken or weak.

• Check combustion chamber door and riddling grate

• Check combustion chamber lining and baffle plates.

The stove must be serviced by a qualified fitter. Use only orignal

spare parts.

Maintaining your

wood-burning stove

Apart from regular chimney sweeping, your wood-burning stove

does not require any regular maintenance. However, we recommend

servicing at least once every two years

Use only original replacement parts for maintenance and repairs of

your stove.

Note! Make sure the wood-burning stove is cold before starting

maintenance or repair work.

Coated surfaces

Clean your wood-burning stove by dusting with a dry, lint-free cloth.

If the topcoat is damaged, you can purchase a repair spray from your

authorised Scan dealer. As slight differences in colour are possible,

spray a larger area to achieve a natural transition for best results.

For best results, apply repair spray when the wood-burning stove is

hand-hot.

Cleaning the glass

Our wood-burning stoves are designed to prevent serious soot build

up on the glass. The best way to achieve this is to make sure you have

a sufficient combustion air supply. It is also important to use dry

wood, and have a correctly dimensioned chimney.

Even if you follow all of our instructions, a slight film of soot can build

up on the glass. You can easily remove this build up by cleaning with

a dry cloth and glass cleaner. Please note that the glass cleaner is not

to get into contact with the gaskets, as this can discolour the glass

permanently.

Combustion chamber lining

Slight cracks can appear in the combustion chamber lining due to

moisture, or to the heating/cooling process. These cracks have no

influence on the heating performance or lifetime of your stove.

However, if the lining starts to crumble, you must replace it. The com-

bustion chamber lining is not covered by the warranty.

Gaskets

All wood-burning stoves have gaskets made of ceramic material fitted

to the stove, the doors, and/or the glass. These gaskets are subject to

wear and tear, and must be replaced when necessary.

Chimney sweeping and cleaning your

wood-burning stove

Follow national and local chimney sweeping regulations. We

recommend having the wood-burning stove cleaned regularly by the

chimney sweep.

Before starting to clean your wood-burning stove, and sweep the flue

pipe, we recommend first removing the baffle plates.

MAINTENANCE

Wood types Kg Dry wood/m

Compared to

beech

Hornbeam 640 1 1 0 %

Beech/Oak 580 1 0 0 %

Ash 570 9 8 %

Maple 540 9 3 %

Birch 510 8 8 %

Pine 480 8 3 %

Fir 390 6 7 %

Poplar 380 65%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scan 66 series Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scan 66 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info