Bedienungsanleitung Scan 68 (Seite 35 von 48) (Englisch)

745571

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

NAVN:

STI:

DIMENSION:

MATERIALE: DATO: SIGN:

Scan A/S

DK-5492 Vissenbjerg©

TG.NR:

EMNE:

C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam

90068010

Portal sokkel mont.

18-03-2015 sr

Scan 68

VÆGT:

AREAL:

N/A

NAVN:

STI:

DIMENSION:

MATERIALE: DATO: SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg©

TG.NR:EMNE:

C:\Working Folder\Designs\Scan 68\90068028.idw

90068028

Friskluft pedestal

17-04-2015 hms

Scan 68

VÆGT:

AREAL:

N/A

NAVN:

STI:

DIMENSION:

MATERIALE: DATO: SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg©

TG.NR:EMNE:

C:\Working Folder\Designs\Scan 68\90068029.idw

90068029

Friskluft fra gulv

20-04-2015 hms

Scan 68

VÆGT:

AREAL:

N/A

FRESH AIR INTAKE

In a well-insulated house the air used for the combustion process has to be replaced. This particularly applies to houses with

mechanical ventilation. There are different ways of making sure that air is exchanged. The most important thing is to ensure that

there is a supply of air to the room where the wood stove is located. The external wall vent must be located as close to the wood

stove as possible, and you must be able to close it when you are not using the stove.

National and local building regulations must be followed with regard to connection of a fresh air intake.

NOTE: WHEN CONNECTING THE SCAN 68 LOW BASE WITH A FRESH AIR INLET, WE RECOMMEND THAT YOU USE A SHORT,

ANGLED CONNECTION PIECE BECAUSE OF THE LIMITED SPACE IN THE BASE. (FOR EXAMPLE JØTUL PRODUCT NO. 158962-F373).

CLOSED COMBUSTION SYSTEM

You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home. External

combustion air is connected through a ventilation pipe via the wall or ﬂoor.

We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system, which can

be closed when the oven is not in use. It can also be an advantage to insulate the ventilation pipe.

Minimum Ø100 mm ventilation pipe, maximum length: 6 meters with a maximum of one bend.

If you want external combustion air via a wall, remove the cover plate at the rear of the stove with a pair of cutting pliers. See the

procedure in this manual.

If the external combustion air is connected at the rear, the dismounted plate must be mounted on the hole for external air in the

bottom of the stove.

NOTE: IF THE STOVE HAS A FRESH AIR CONNECTION OR CLOSED COMBUSTION, THE VENTILATION PIPE MUST BE OPEN, WHEN THE

STOVE IS IN USE.

External air supply

through the wall.

External air supply

through

the ﬂoor.

The external air supply can be connected through the pedestal or the portal by mounting the delivered connecting piece.

PORTAL

If you want to connect an

external air supply from the

bottom of the base, remove

the blind ﬂange and mount it

at the top of the base. Then

mount the delivered connect-

ing piece under the base as

shown below.

PEDESTAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scan 68 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scan 68

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info