Bedienungsanleitung Scheppach Air Force (Seite 20 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

781499

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

AC motor

• The mains voltage must be 220 - 240 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

10. Cleaning, maintenance and storage

m Important!

Pull out the power plug before doing any cleaning and

maintenance work on the equipment. Risk of injury

from electric shock!

m Important!

Wait until the equipment has cooled down complete-

ly! Risk of burns!

m Important!

Always depressurize the equipment before carrying

out any cleaning and maintenance work! Risk of in-

jury!

Cleaning

• Keep the equipment free of dirt and dust as far as

possible. Wipe the equipment with a clean cloth or

blow it down with compressed air at low pressure.

• We recommend that you clean the equipment im-

mediately after you use it.

• Clean the equipment regularly with a damp cloth

and some soft soap. Do not use cleaning agents

or solvents; these may be aggressive to the plastic

parts in the equipment. Ensure that no water can

get into the interior of the equipment.

• You must disconnect the hose and any spraying

tools from the compressor before cleaning. Do not

clean the compressor with water, solvents or the

like.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the

following parts are therefore also required for use

as consumables.

Wear parts*: coupling

* Not necessarily included in the scope of delivery!

To do so, please rst remove the hose with the valve

adapter (8).

Now screw the blow-out adapter (D) to the tyre ina-

tion device (G).

Using the adapter set

The adapter set enables you to use the following ad-

ditional capabilities of the tyre ination device:

• Pumping up balls with the help of the ball needle

(F).

• The valve adapter (E) enables bicycle tyres to be

inated.

• Filling pools, air mattresses or boats with the help

of the additional adapter (K).

• Filling items with threaded valves (e.g. Boats) with

the screw-in valve adapter (J).

• Deating large volume items. The deating adapter

• The two conical universal adapters (A/B) can like-

wise be used for inating air mattresses.

9. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies

with the applicable VDE and DIN provisions.

The customer‘s mains connection as well as

the extension cable used must also comply with

these regulations.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Air Force Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info