Bedienungsanleitung Scheppach BAP350 (Seite 24 von 80) (Deutsch, Englisch, Französisch, Finnisch)

781996

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

Assembly of hose (Fig. 5 + 6)

Attach the hose (B) to the nozzle of the de-

vice and the retaining hook, see illustrations.

• Check whether the pressure line has

been attached correctly and the un-

used pump outlet is fully closed.

• Avoid that the pump runs dry.

• Check that the electrical connection is

230V~ / 50Hz

• Check the proper status of the electrical

plug socket and make sure that the plug

󰀩

Insert the pump plug into the plug sock-

et and the pump is ready for operation.

• Make sure that moisture or water nev-

er come in contact with the mains con-

nection.

• There is a risk of electrocution.

9. Initial operation

m IMPORTANT!

You must fully assemble the appliance



Fitting the pump to a rain barrel



to the rain barrel (1).

Adjustment of the oat switch

•       

that the switching point ON level and

the switching point OFF level can be

reached easily and with little expendi-

ture of energy.

• Check this by placing the pump into a



switch carefully by hand and then low-

er it again. In this case, you can see

󰀨

7. Unpacking

Open the packaging and remove the de-

vice carefully.

Remove the packaging material as well

as the packaging and transport bracing

(if available). Check that the delivery is

complete.

Check the device and accessory parts for

transport damage. In case of complaints

the dealer must be informed immediate-

ly. Subsequent complaints will not be ac-

cepted.

If possible, store the packaging until the

warranty period has expired. Read the op-

erating manual to make yourself familiar

with the device prior to using it.

Only use original parts for accessories as

well as for wearing and spare parts. Spare

parts are available from your specialized

dealer. Specify our part numbers as well

as the type and year of construction of the

device in your orders.

m ATTENTION

The device and packaging materials

are not toys! Children must not be al-

lowed to play with plastic bags, lm

and small parts! There is a risk of

swallowing and su󰀨ocation!

8. Attachment / Before start-

ing the equipment

Mounting the suspension hook (Fig. 3

+ 4)

1. Screw the aluminium tube (D) to the

pump connection.

2. Screw the aluminium tubes (C + D) to-

gether.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BAP350 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info