Bedienungsanleitung Scheppach BCH5300BP (Seite 26 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

781392

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

26 GB

• Do not put hands or feet near or under rotating

parts.

• Never pick up or carry an appliance while the mo-

tor is running.

• Pull the spark from the socket:

–whenever you leave the machine;

–before clearing a blockage;

–before checking, cleaning or working on the ap-

pliance;

–after striking a foreign object. Inspect the appli-

ance for damage and make repairs as neces-

sary;

–if the appliance starts to vibrate abnormally

(check immediately).

4. Maintenance and storage

• Keep all nuts, bolts, and screws tight to be sure the

appliance is in safe working condition.

• Check the grass catcher frequently for wear or de-

terioration.

• Replace worn or damaged parts for safety.

• For rotary mowers, ensure that only replacement

cutting means of the right type are used.

–Never store the equipment with petrol in the

tank inside a building where fumes can reach

an open ame or spark;

–Allow the engine to cool before storing in any

enclosure;

–To reduce the re hazard, keep the engine, si-

lencer, battery compartment and petrol storage

area free of grass, leaves, or excessive grease;

–If the fuel tank has to be drained, this should be

done outdoors.

Special safety warning

1. Grip the handles of the brush cutter rmly with

both hands. If you suspend the work, place the

throttle into the idling position.

2. Always be sure to maintain a steady, even pos-

ture while working

3. Maintain the speed of the engine at the level re-

quired to perform cutting work and never raise

the speed of the engine above the necessary

level.

4. If the grass gets caught in the blade during op-

eration, or if you need to check the unit or refuel

the tank always be sure to turn off the engine.

5. If the blade touches a hard object like a stone im-

mediately stop the engine and check if something

is wrong with the blade. If so, replace the blade

with a new one.

6. If someone calls out while working, always be

sure to turn off the engine before turning around.

7. Never touch the spark plug or plug cord while the

engine is in operation. Doing so may result in be-

ing subjected to an electrical shock.

8. Never touch the mufer, spark plug or other me-

tallic parts of the engine while the engine is in

operation or immediately after shutting down the

engine. Doing so may result in serious burns.

9. When you nish cutting in one location and wish

to continue working in another spot, turn off the

engine and turn the machine to have the blade

facing away from your body.

10. Check that the cutting attachment stopped turn-

ing under the engine idle before starting to use

the machine.

Residual risks

• There will always be residual risks, even if you use

this equipment according to instructions. The fol-

lowing hazards can occur in connection with the

construction and design of this tool.

• Health hazards resulting from swinging of hand

and arm if the equipment is used for an extend-

ed period and if it is not operated or maintained

properly.

• Injuries and material damage caused by ejection

of tool attachments which are unexpectedly thrown

from the equipment because of sudden damage,

wear and tear or improper attachment.

• Warning! This tool generates an electromagnetic

eld during operation. Under certain circumstanc-

es, this eld can affect active or passive medi-

cal implants. In order to reduce the risk of severe

or fatal injuries, we recommend that people with

medical implants consult their doctor and the man-

ufacturer of the medical implant before operating

the machine.

Before working on the tool itself (e.g. transport,

set-up, retooling, cleaning and maintenance),

disconnect the spark plug cap!

6. Technical data

BCH5300BP

Technical data

Cutting data grass trimmer

Cutting circle diameter of line

Ø mm 450

Cutting line diameter Ø mm 2 x 2.8

Cutting line length m 4

Max. cutting speed max. min-1 7200

Cutting data brush cutter

Cutting circle diameter of blade

Ø mm 255

Cutter balde thickness mm 1.4

Teeth quantity 3

Max. cutting speed max. min-1 8500

Power unit

Displacement cm³ 51.7

Max. engine output kW 1.3

Fuel tank capicity cm³ 1000

Engine type 2-stroke engine, air-

cooled

Weight kg 11,4

Subject to technical changes!

Information concerning noise emission measured ac-

cording to relevant standards:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BCH5300BP Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info