Bedienungsanleitung Scheppach BG150 (Seite 17 von 152) (Alle Sprachen)

781665

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

17GB

LpA sound pressure level (bg 150)........ 82 dB(A)

LpA sound pressure level (bg 200)........ 86 dB(A)

KpA uncertainty .......................................3 dB

LWA sound power level (bg 150)............ 92 dB(A)

LWA sound power level (bg 200)............ 96 dB(A)

KWA uncertainty ......................................3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions)

determined in accordance with EN 61029.

Vibration emission value ah ≤ 2.5 m/s2

K uncertainty = 1.5 m/s2

Warning!

The speci ed vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the speci ed value in excep-

tional circumstances.

The specied vibration value can be used to compare

the equipment with other electric powertools.

The specied vibration value can be used for initial

assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect working-

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

7. Assembly

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making

adjustments to the equipment.

Pull the power plug before doing any maintenance

or assembly work on the equipment.

• The machine must be set up so that it stands rmly,

i.e. it must be securely screwed to a work bench or

similar.

• All covers and safety devices have to be properly t-

ted before the equipment is switched on.

• The grinding wheels must rotat freely.

• Check that the voltage on the rating plate is the

same as your supply voltage before you connect the

equi ment to the power supply.

• The adjustment of the work rest shall be made fre-

quently, so as to compensate the wear of the wheel,

keeping the distance between the work rest and the

wheel as small as possible, and no greater than 2 mm.

• Use wheels that have a bore exactly equal to the

arbor of the grinder. Do not attempt to machine an

undersized wheel to t an arbor.

• Do not overtighten wheel nut.

• Do not grind on a cold wheel. The grinding wheel

should be started and run at idle speed for one min-

ute before applying the work.

• Do not grind on the side of the wheel. Grind on the

face of the wheel only.

• Do not apply coolant directly to a grinding wheel.

Coolant can weaken the bonding strentgh of the

wheel and cause it to fail.

• Sparks are a hazard. Do not grind near gas or am-

mable liquids.

• Stand to one side of the wheel when turning on the

power. Dress the wheel on the face only. Dressing

the side of the wheel can cause it to become too thin

for safe use.

• Grinding creates heat. Do not touch the work piece

until you are sure it has cooled down sufciently.

• Use grinding wheels that are rated for safe use on

the grinder. Do not use a wheel that is rated lower

than the grinder speed.

6. Technical Data

bg 150 /bg 200

Delivery

Bench Grinder bg 150/bg 200

User’s Manual

Technical Data

Dimensions L x W

x H mm 385 x 240 x 280 440 x 280 x 340

ø grinding disc

max. mm left/right 150 200

ø grinding disc

min. mm left/right

(after wear and tear) 110 160

ø grinding disc

bore max. mm 12,7 15,88

grinding disc

width mm left/right 25

Lamp Typ V/W E14 12/10

Weight kg 10,0 15,2

Motor

Motor V/Hz 230/50

Input power P1 W 370 S2/30min 550 S2/30min

Motor speed 1/min 2850

Subject to technical changes!

Load factor:

A load factor of S2 30 min (intermittent periodic duty)

means that you may operate the motor continuously at

its nominal power level (370/550 W) for no longer than

30 minutes ON period. If you fail to observe this time

limit the motor will overheat. During the OFF period

the motor will cool again to its starting temperature.

Sound and vibration

Sound and vibration values were measured in

accordance with EN 61029.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BG150 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info