Bedienungsanleitung Scheppach BGS700 (Seite 17 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

781662

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

2. Device description (Fig. 1-3)

1 Safety glass

2 Spark deector

3 Spark deector adjusting screw

4 Fastening screw Safety glass holder

5 Guard hood

6 Grinding wheel

7 Workpiece support star screw

8 Workpiece support

9 Grinding / sanding belt

10 Belt guidance adjustment screw

11 Clamp screw for the top belt roller

12 Fastening screw for side cover

13 Side cover

14 Mounting point

15 Foot

16 On/Off switch

17 Coolant reservoir

18 Fastening screw for workpiece support

3. Scope of delivery

Grinder/Sander (1)

Instruction manual (1)

Sanding disc (1)

Sanding belt (1)

Grinding wheel dresser (1)

Waranty sticker (1)

• Open the packaging and remove the device

carefully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warran-

ty period has expired.

m Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Intended use

The grinder/sander is a combination device for the

coarse and ne grinding/sanding of metals, woods

of all kinds and other materials using the appropriate

grinding/sanding wheel or belt.

The machine may only be used with grinding/san-

ding wheels or belts which are suitable for it and

comply with the characteristic data in these instruc-

tions.

The machine is allowed to be used only for its

intended purpose! Even when the equipment is used

as prescribed it is still impossible to eliminate certain

residual risk factors. The following hazards may

arise in connection with the machine’s construction

and layout:

• Contact with the grinding wheel where it is not

covered.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope you have a lot of fun and success using your

new machine.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• improper handling,

• noncompliance of the operating instructions,

• repairs by third parties, not by authorized service

technicians,

• installation and replacement of non-original spare

parts,

• non-intended use,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

that you read through the entire operating instruc-

tions before putting the machine into operation.

These operating instructions are to assist you in get-

ting to know your machine and utilize its proper ap-

plications. The operating instructions contain impor-

tant notes on how you work with the machine safely,

expertly, and economically, and how you can avoid

hazards, save repair costs, reduce downtime and in-

crease the reliability and service life of the machine.

In addition to the safety requirements contained in

these operating instructions, you must be careful to

observe your country’s applicable regulations.

The operating instructions must always be near the

machine. Put them in a plastic folder to protect them

from dirt and humidity. They must be read by every

operator before beginning work and observed con-

scientiously. Only persons who have been trained in

the use of the machine and have been informed of

the various dangers may work with the machine. The

required minimum age must be observed. In addition

to the safety requirements in these operating instruc-

tions and your country’s applicable regulations, you

should observe the generally recognized technical

rules concerning the operation of identically con-

structed devices.

17 / 136

FR CZ SK DK ES FIN IT NL PL PT SE SI NO

GBDE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BGS700 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info