Bedienungsanleitung Scheppach BGS700 (Seite 19 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

781662

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

auxiliary equipment from the manufacturer of

your electric tool.

• Always wear safety goggles, protective gloves

and ear-muffs while carrying out grinding, brus-

hing and cutting jobs.

• Check that the rotating speed shown on the

wheel is equal to or higher than the rated speed

of rotation for the tool.

• Make sure that the grinding wheel is of the cor-

rect size for the grinder.

• Grinding wheels must be handled and stored

with care in accordance with the manufacturer’s

instructions. Examine the grinding wheel each

time before using it. Never use grinding wheels

which have parts broken off or are cracked or in

any other way damaged.

• Be sure to use only grinding wheels and bru-

shes which are marked with a speed at least as

high as the speed indicated on the rating plate

of the electric tool.

• Check that grinding wheels are tted in ac-

cordance with the manufacturer’s instructions.

• Make sure that intermediate layers are used if

they are supplied with and required for the grind-

ing wheel.

• Make sure that the grinding disk is correctly t-

ted and secured before you start to use the tool.

Allow the machine to run without load and in a

safe position for 5 minutes. Stop the machine

immediately if severe vibrations arise or any

other defects are noticed. If this should be the

case, examine the machine to nd the cause.

• The electric tool must never be used without the

guard hood supplied with it.

• Never use separate reducer sleeves or adapters

to make grinding wheels with larger holes t on

the machine.

• Take precautions to ensure that ying sparks

do not cause any danger, e.g. that they do not

hit anyone or cause inammable substances to

ignite.

• Always wear safety goggles and ear-muffs; use

other personal safety equipment such as gloves,

an apron and a helmet if necessary.

m The workpiece becomes hot during grinding.

Important! Risk of burns!

Let the workpiece cool down. The material may

become glowing hot during the grinding. On longer

jobs, allow the workpiece to cool down occasionally.

• Do not use coolant or the like.

Special safety information

1 Before you use the grinder, carry out a ring test

on the grinding wheels (perfect grinding wheels

emit a clear tone when hit lightly with e.g. a

plastic hammer). This also applies when you t

new grinding wheels (damage in transit). It is

essential to subject the machine to an unloaded

test run of at least 5 minutes. Leave the danger

zone while the test is in progress.

2 Use only grinding wheels which are marked with

details of the manufacturer, the type of bonding

agent used, dimensions and the permissible

RPM.

3 Grinding wheels must be stored in a dry place,

ideally at a constant temperature.

4 Use only the clamping anges supplied with the

equipment to mount the grinding wheels.

turn it on and off

20. m Warning!

The use of any other accessory or attach ment

other than recommended it this operating

instruction or the catalog may present a risk of

personal injury.

21. Have your tool repaired by an expertThis elec-

tric appliance is in accordance with the relevant

safety rules repairing of electric appliances may

be carried out only by experts otherwise it may

cause considerable danger for the user.

22. Connect the dust extraction device

Wherever there are facilities for tting a dust

extraction system, make sure it is connected and

used.

General safety regulations and accident preven-

tion

It is essential that you read the safety regulations

and operating instructions in their entirety and fol-

low the information contained therein in order to

eliminate the possibility of an accident or potentially

dangerous situation from occurring while working

with the machine.

• Always check the device, the mains cable and

the plug before using the device. Only operate

the tool when it is in good working order and is

not damaged in any way. Damaged parts have

to be replaced immediately by a qualied electri-

cian.

• Always pull the power plug out of the socket

outlet before doing any work on the machine,

before changing tools and whenever the machi-

ne is not being used.

• To prevent damage to the power cable, always

lead the power cable away from the rear of the

machine.

• Keep the tools in a safe place and out of the

reach of children.

Use on materials containing asbestos is prohi-

bited.

Note the corresponding accident prevention regula-

tion issued by the professional associations in your

country.

• Use only original replacement parts.

• Repairs may only be carried out by a qualied

electrician.

• The machine may exceed 91.5 dB at the work-

place. The operator will require noise protection

measures and ear muffs if this is the case.

The noise of this electric tool is measured in

accordance with IEC 59 CO 11, IEC 704, DIN

45635 part 21, NFS 31-031 (84/537/EEC).

• Ensure that you maintain a steady foothold.

Avoid abnormal working postures.

• Do not expose your electric tool to rain. Never

use electric tools in damp or wet locations or

near ammable liquids or gases.

• Protect the mains cable from becoming dama-

ged by oil, solvents and sharp edges.

• Keep your work area tidy.

• Make sure that the switch is turned off when

connecting the tool to the power supply.

• Wear suitable work clothes. Never wear loose

tting clothes and jewellery. Wear a hair net if

you have long hair.

• For your own safety, use only accessories and

19 / 136

FR CZ SK DK ES FIN IT NL PL PT SE SI NO

GBDE

Scheppach BGS700 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info