Bedienungsanleitung Scheppach BS2000 Primaster (Seite 29 von 46) (Deutsch, Englisch, Französisch)

782174

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

29GB

Electrical connection lines must comply with the rel-

evant VDE and DIN regulations. Only use connection

lines labelled with H05VV-F. The labelling of the con-

nection cable with the type specication is required.

AC motor

• The mains voltage must be 220 - 240 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

14. Disposal and recycling

The equipment is supplied in packaging to preven it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with

household waste!

This symbol indicates that this product must

not be disposed of together with dome-

stic waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical

and electronic equipment (WEEE).

This product must be disposed of at a designated

collection point. This can occur, for example, by han-

ding it in at an authorised collecting point for the re-

cycling of waste electrical and electronic equipment.

Improper handling of waste equipment may have ne-

gative consequences for the environment and hu-

man health due to potentially hazardous substances

that are often contained in electrical and electronic

equipment. By properly disposing of this product, you

are also contributing to the effective use of natu-

ral resources. You can obtain information on collec-

tion points for waste equipment from your municipal

administration, public waste disposal authority, an

authorised body for the disposal of waste electri-

cal and electronic equipment or your waste disposal

company.

15. Troubleshooting

Problem Possible cause Help

Motor does not work Motor, cable or plug defective, fuses burnt

Housing cover open (limit switch)

Arrange for inspection of the machine by a

specialist. Never repair the motor yourself.

Danger!

Check fuses and replace as necessary

Close housing cover exactly

The motor starts up

slowly and does not

reach operating speed.

Voltage too low, coils damaged, capacitor

burnt

Contact the utility provider to check the voltage.

Arrange for inspection of the motor by a

specialist.

Arrange for replacement of the capacitor by a

specialist

Motor makes excessive

noise

Coils damaged, motor defective Arrange for inspection of the motor by a

specialist

The motor does not

reach its full power.

Circuits in the network are overloaded (lamps,

other motors, etc.)

Do not use any other equipment or motors on

the

same circuit

Motor overheats easily. Overloading of the motor, insufcient cooling

of the motor

Avoid overloading the motor while cutting,

remove

dust from the motor in order to ensure optimal

cooling of the motor

Saw cut is rough or

wavy

Saw blade dull, tooth shape not appropriate for

the material thickness

Resharpen saw blade and/or use suitable saw

blade

Workpiece pulls away

and/or splinters

Excessive cutting pressure and/or saw blade

not suitable for use

Insert suitable saw blade

Saw blade is not running

straight

a) Guide has been wrongly set

b) Wrong saw blade

a) Set the saw blade guide according to the

operating instructions

b) Select a saw blade according to the operating

instructions

Burn marks appear on the

wood during the cutting

work

a) Blunt saw blade

b) Wrong saw blade

a) Change the saw blade

b) Select a saw blade according to the operating

instructions

Saw blade jams during

cutting work

a) Blunt saw blade

b) Deposits on the saw blade

c) Guide has been set poorly

a) Change the saw blade

b) Clean the saw blade

c) Set the saw blade guide according to the

operating instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BS2000 Primaster Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info