Bedienungsanleitung Scheppach BSH400 (Seite 16 von 28) (Deutsch, Englisch, Italienisch)

782178

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

english

•

When leaving the work place, switch the motor off.

Pull

the power supply plug!

•

Connection and repair work on the

electrical installation

may be carried out

by a quali ed electrician only

•

All protection and safety devices must be replaced after

completing repair and maintenance procedures.

•

Cut off the external power supply of the machine even if

only minor changes of place are envisaged. Properly

reconnect the machine to the supply mains before

recommissioning.

 Proper use

CE tested machines meet all valid EC machine guidelines as

well as all relevent guidelines for each machine.

•

The machine has been built in accordance with state-of-

the-art standards and the recognized safety rules.

Nevertheless, its use may constitue a risk to life and

limb of the user or of third parties, or cause damage to

the machine and to other material property.

•

The machine must only be used in technically perfect

condition in accordance with its designated use and the

instructions set out in the operating manual, and only by

safety-conscious persons who are fully aware of the risks

involved in operating the machine. Any functional

disorders, especially those affecting the safety of the

machine, should therefor be recti ed immediately.

•

When used in enclosed rooms, the machine must be

connected to a vacuum exhaust unit. Use the

scheppach

dust extractor ha 3200 or ha 2600

to remove matchwood

or saw dust. The vacuum support  ow rate must be 20

m/s. Subatmospheric pressure 1200 Pa.

•

The

scheppach automatic switching unit

is available as a

special accessory. The vacuum exhaust unit auto-

matically switches on after a 2-3 second delay after the

machine tool is turned on. This avoids overloading the

circuit fuse. After turning off the machine tool, the

vacuum exhaust unit remains on for an additional 3-4

seconds and is then automatically switched off.

Remaining dust is thereby removed by vacuum exhaust,

as required by German regulations governing hazardous

materials. This results in savings in electricity con-

sumption and reduces noise levels, as the vacuum

exhaust unit is on only during machine tool operation.

•

For work in commercial spaces, the

scheppach dust

remover rg 4000

must be used. Do not remove or shut

off vacuum exhaust systems or dust removers while

machine tools are operating.

•

The

scheppach circular saw bench

has been designed to

be used exclusively with

scheppach tools

and accessories

for sawing wood. Be sure to securely hold and feed all

work pieces when sawing.

•

Any other use exceeds authorization. The manufacturer

is not responsible for any damages resulting from

unauthorized use; risk is the sole responsibility of the

operator.

•

The safety, work and maintenance instructions of the

manufacturer as well as the technical data given in the

calibrations and dimensions must be adhered to.

•

Relevant accident prevention regulations and other, gen-

e rally recognized safety-technical rules must also be

adhered to.

•

The

scheppach Circular Saw

may only be used, main-

tained, and operated by persons familiar with and

instructed in its operation and procedures. Arbitrary

alter ations to the machine release the manufacturer

from all responsibility for any resulting damages.

•

The

scheppach Circular Saw

may only be operated with

original accessories and original attachments and saw

blades from the manufacturer.

•

Current applicable regulations prohibit operation of this

machine in closed rooms. This machine must only be

operated in the open, or in rooms with suf cient venti la-

tion.

 Remaining hazards

The machine has been built using modern technology in

accor dance with recognized safety rules. Some remaining

hazards, however, may still exist.

•

The rotating saw blade can lead to injury to  ngers and

hands if the work piece is incorrectly fed.

•

Thrown work pieces can lead to injury if the work piece

is not properly secured or fed, such as working without a

fence.

•

Wood chips and sawdust can be health hazards. Be sure

to wear personal protective gear such as safety goggles

and a dust mask. Use a vacuum exhaust system.

•

Defective saw blades can cause injuries. Regularly

inspect the structural integrity of saw blades.

•

The use of incorrect or damaged mains cables can lead

to injuries caused by electricity.

•

Even when all safety measures are taken, some

remaining hazards which are not yet evident, may still be

present.

•

Remaining hazards can be minimized by following the

instructions in “Safety Precautions”, “Proper Use”, and

in the entire operating manual.

bsh 400 bsh 500

Delivery Package

Circular saw

Ripping fence

Cross-cutting gauge

Saw blade

Pushing pole

Blade key

Holding mandril

Assembly accessories

Operating

instructions

Operating

instructions

Technical Data

Dimensions

LxWxH mm

1075 x 790 x 1035

Table size mm

675 x 1000

Saw blade

ø mm

400

500

Cutting height

mm.

110

Saw blade

adjustment

range mm

130

Speed rpm

2800

Weight kg

Motor

230 V/50 Hz

400 V/50 Hz

Input P1

3,5

5,0

Ouput P2

2,6

4,0

Subject to technical modi cations!

Scheppach BSH400 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info