781465
16
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
16 | GB
e. When working outdoors with an electrical
power tool always use extension cables that
are also approved for use outdoors. The use
of an extension cable suitable for outdoor use re-
duces the risk of electric shock.
f. Use a residual current device (RCD) for pro-
tection if operating the electrical power tool in
a moist environment is unavoidable. The use
of an RCD reduces the risk of electric shock.
3) Personal safety
a. Remain alert at all times, watch what you are
doing and always proceed with caution. Do
not use the device if you are tired or under
the inuence of drugs, alcohol or medication.
One moment of carelessness when using the de-
vice can lead to serious injury.
b. Wear personal protective equipment and al-
ways wear safety glasses. The wearing of per-
sonal protective equipment such as dust masks,
non-slip safety shoes, safety helmets or ear pro-
tectors, appropriate to the type of electrical power
tool used and work undertaken, reduces the risk
of injury.
c. Avoid unintentional operation of the de-
vice. Check that the electrical power tool
is switched off before you connect it to the
mains, pick it up or carry it. Accidents can hap-
pen if you carry the device with your nger on the
ON / OFF switch or with the device switched on.
d. Remove any setting tools or spanners before
you switch the device on. A tool or spanner left
attached to a rotating part of a device can lead to
injury.
e. Avoid placing your body in an unnatural po-
sition. Keep proper footing and balance at all
times. By doing this you will be in a better position
to control the device in unforeseen circumstanc-
es.
f. Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves clear of moving parts. Loose cloth-
ing, jewellery or long hair can become trapped in
moving parts.
g. If vacuum dust extraction and collection de-
vices are tted do not forget to check that
they are properly connected and correctly
used. The use of these devices reduces the haz-
ard presented by dust.
h. Do not let familiarity gained from frequent use
of the tool allow you to become complacent
and ignore tool safety principles. A careless
action can cause severe injury within a fraction
of a second.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
5. Safety information
m WARNING! Read all safety warnings, instruc-
tions, illustrations and technical data provided
with this power tool.
Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury.
Save all warnings and instructions for future refer-
ence.
The term power toolused in the safety instructions
refers to mains powered power tools (with power
cord) and cordless power tools (without power cord).
1) Workplace safety
a. Keep your working area clean and well lit. Un-
tidy or poorly lit working areas can lead to acci-
dents.
b. Do not work with the device in potentially ex-
plosive environments in which there are in-
ammable liquids, gases or dusts. Electrical
power tools create sparks, which can ignite dusts
or fumes.
c. Keep children and other people away while
you are operating the electrical tool. Distrac-
tions can cause you to lose control of the device.
2) Electrical safety
a. The connection plug of the electric tool must
t into the socket. The plug may not be mod-
ied in any way. Do not use an adaptor plug
together with earthed electric tools. Unmodi-
ed plugs and suitable sockets reduce the risk of
an electric shock.
b. Avoid touching earthed surfaces such as
pipes, radiators, ovens and refrigerators with
any part of your body. There is an increased risk
of electric shock if your body is earthed.
c. Keep the device away from rain or moisture.
Water entering an electrical device increases the
risk of electric shock.
d. Do not use the mains lead for any purpose for
which it was not intended, e.g. to carry the
device, to hang up the device or to pull the
mains plug out of the mains socket. Keep the
mains lead away from heat, oil, sharp edges
or moving parts of the device. Damaged or
tangled mains leads increase the risk of electric
shock.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scheppach CJS254-20ProS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info