Bedienungsanleitung Scheppach CMT200-20ProS (Seite 19 von 80) (Deutsch, Englisch, Französisch, Polnisch)

781444

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

6. Additional Safety Warnings

Device-specic safety instructions for Multi-tool

• This power tool is designed for sawing, cutting,

grinding and sanding. Read all safety warnings, in-

structions, illustrations and technical data supplied

with this power tool. Failure to follow the instruc-

tions below can lead to electric shocks, re and/or

serious injuries.

• Use clamps or another practical method to secure

and support the workpiece on a stable surface. If

the workpiece is held only by hand or against the

body, it will be in an unstable position that may re-

sult in a loss of control.

• Avoid cutting nails. Inspect the workpiece for any

nails and remove them before work.

• Before switching on the machine, make sure that

the application tool does not touch the workpiece.

• Keep hands away from moving parts

• Do not leave the machine running unattended. Only

use the machine with a hand posture.

• Always switch the machine off and wait until the

saw blade has come to a complete standstill, be-

fore removing the saw blade from the workpiece.

• Avoid touching the application tool or workpiece

immediately after machining because the parts are

still very hot and can cause burns on skin.

• Do not let the machine idle unnecessarily.

• Always use the correct dust protection or breathing

mask for the respective material and application.

• Some materials may contain toxic chemicals. Take

precautions to prevent inhalation of working dust

and contact with skin. Follow the safety data of the

material manufacturer.

• Do not wet the workpiece surface with water be-

cause this machine is not waterproof.

• Ensure adequate ventilation of the work area dur-

ing grinding operations.

• The use of this machine to sand certain products,

paints and wood may expose the user to dust

containing hazardous substances. Use suitable

breathing protection.

• Do not use accessories that are not specically

designed and recommended by the tool manufac-

turer. The mere fact that an accessory can be at-

tached to your power tool does not guarantee safe

operation.

• Wear protective equipment. Depending on the

work, use a face shield or safety or safety goggles.

If necessary, wear ear protectors, gloves and a

work apron that is able to repel small grinding par-

ticles or workpiece splinters. The eye protection

must be able to repel the ying dust generated dur-

ing various operations. The dust mask or breathing

mask must be capable of ltering out particles gen-

erated by the work. Long-term exposure to noise

can lead to hearing damage.

h) Do not let familiarity gained from frequent use

of the tool allow you to become complacent

and ignore tool safety principles. A careless

action can cause severe injury within a fraction

of a second.

4. Careful handling and use of electrical power tools

a) Do not overload the device. Always use an

electrical power tool that is intended for the

task you are undertaking. By using the right

electrical power tool for the job you will work more

safely and achieve a better result.

b) Do not use an electrical power tool if its switch

is defective. An electrical power tool that can no

longer be switched on and off is dangerous and

must be repaired.

c) Pull the mains plug from the socket before you

make any adjustments to the device, change

accessories or when the device is put away.

This precaution is intended to prevent you from

unintentionall starting the device.

d) When not in use always ensure that electrical

power tools are kept out of reach of children.

Do not let anyone use the device if he or she

is not familiar with it or has not read the in-

structions and advice. Electrical power tools

are dangerous when they are used by inexperi-

enced people.

e) Look after the device carefully. Check that

moving parts are working properly and move

freely. Check for any parts that are broken

or damaged enough to detrimentally affect

the functioning of the device. Have damaged

parts repaired before you use the device.

Many accidents have their origins in poorly main-

tained electrical power tools.

f) Keep cutting tools clean and sharp. Carefully

maintained cutting tools with sharp cutting edges

are less likely to jam and are easier to control.

g) Use the electrical power tool, accessories,

inserted tools etc. in accordance with these

instructions and advice, and the stipulations

drawn up for this particular type of device. In

doing this, take into account the working con-

ditions and the task in hand. The use of elec-

trical power tools for purposes other than those

intended can lead to dangerous situations.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the power tool in un-

expected situations.

5) Service

a) Have your power tool repaired by qualied

specialists only, and always use original

spare parts for repair. This is to maintain the

safety of the power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CMT200-20ProS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info