Bedienungsanleitung Scheppach CMT200-20ProS (Seite 21 von 80) (Deutsch, Englisch, Französisch, Polnisch)

781444

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

Noise output in dB

Sound power level LWA 95 dB(A) (EN ISO 3744)

Sound pressure level LpA 84 dB(A) (EN ISO 11201)

Uncertainty Kwa/pA 3 dB(A)

Vibrationskennwerte

No load

Vibration ah 9,3 m/s²

Uncertainty Kh 1,5 m/s²

Grinding

Vibration ah 3.9 m/s²

Uncertainty Kh 1,5 m/s²

9. Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage. Inform the transport agent immediately of

any faults. Later complaints cannot be considered.

• If possible, store the packaging until the warranty

period has expired.

• Familiarize yourself with the machine with the help

of the operating instructions manual before using it.

• Use only original parts for accessories as well as

consumables and spare parts. Spare parts can be

obtained from your scheppach retailer.

• Please quote our article numbers as well as type

and production year in all your orders.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

10. Assembly

CAUTION:

• Always make sure that the machine is switched off

and the battery removed before carrying out any

work on the machine.

Fitting and removing the application tool (Figs.

2 and 3 )

WARNING:

• Do not t the application tool upside down. If an

application tool is tted the wrong way round, it can

damage the machine and cause serious injury.

• Fit the application tool in the correct direction ac-

cording to the work to be done. The application tool

can be tted in positions offset by 30 degrees.

CAUTION:

• Be careful when closing the locking lever. The lock-

ing lever may suddenly close and pinch a nger.

• The moving part of the locking lever must be reg-

ularly cleaned of dust and lubricated. Otherwise,

dust may accumulate on the moving part of the

locking lever and impede its smooth movement.

• Do not start the tool while the lever is opening. Oth-

erwise the tool may be damaged.

1) Open the locking lever fully. And remove the re-

taining screw.

2) Place the application tool (optional accessory) on

the tool ange so that the protrusions of the tool

ange t into the holes of the application tool.

3) Insert the retaining screw as far as it will go. Then

return the locking lever to its original position.

If using an application tool for sanding, t the ap-

plication tool to the sanding pad so that it matches

the direction of the pad. The sanding pad features a

Velcro t system that allows comfortable and quick

application of sandpaper. Since sandpaper has holes

for dust extraction, t the sandpaper so that its holes

coincide with those in the sanding pad. To remove the

sandpaper, lift its edge and remove the paper.

To remove the retaining screw, use the assembly pro-

cedure in reverse.

If using application tools with a different type of in-

stallation part, select a correct adapter (optional ac-

cessory).

11. Installation

To ensure that the Li battery pack provides long ser-

vice you should take care to recharge it promptly. You

must recharge the battery pack when you notice that

the power of the cordless equipment drops.

Always make sure that the machine is switched off

before inserting the battery into the machine.

Insertion / removal of a batterypack into the ap-

pliance

Ensure that the appliance is switched off before in-

serting the battery. The insertion of a battery into an

electrical appliance that is switched on can lead to

accidents.

Inserting the rechargeable battery pack:

Move the rotation switch (2) into the middle position

(lock) and push the rechargeable battery pack (5) into

the handle until it engages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CMT200-20ProS Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info