Bedienungsanleitung Scheppach CRS450-20ProS (Seite 19 von 76) (Deutsch, Englisch, Französisch, Polnisch)

781445

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

19 | GB

ADDITIONAL SAFETY WARNINGS

Caution: Risk of injury and damage to property!

• Do not use any blunt or bent blades or blades which

are damaged in any other way.

• Before sawing the work piece, check for hidden for-

eign objects such as nails, screws. These must be

removed.

• Always insert a suitable saw blade.

• Secure the work piece with the aid of clamping de-

vices on the workbench.

• Apply only as much pressure as is required for

sawing. If there is excessive pressure, the sawing

blade may bend and break.

• Switch the device off immediately if the sawing

blade jams. Spread the saw cut out and pull the

blade out carefully.

• Always stand to the side of the saw when working.

• Always make sure that the workplace is well ven-

tilated.

• Avoid over-stressing the device while working.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are

recommended by the manufacturer. Risk of re

if a charger that is suitable for a specic type of

battery is used with other batteries.

• In the power tools, use only the batteries de-

signed for the purpose. The use of other batter-

ies may result in injuries and risk of re.

• Keep the unused battery away from paper

clips, coins, keys, nails, screws and other small

metal objects, which could cause bridging of

the contacts. A short circuit between the battery

contacts may cause burns or re.

• If used incorrectly, liquid may leak from the

battery. Avoid contact with this. In the event of

accidental contact, rinse off with water. If the

liquid gets into eyes, seek medical assistance.

Leaking battery uid may cause skin irritations

or burns.

• Ensure that the device is switched off before

inserting the battery. Inserting a battery into a

power tool that is switched on may result in acci-

dents.

• Recharge the batteries indoors only because

the battery charger is designed for indoor use

only. Risk of electric shock.

• To reduce the electric shock hazard, unplug the

battery charger from the mains before cleaning

the charger.

• Do not subject the battery to strong sunlight

over long periods and do not leave it on a heat-

er. Heat damages the battery and there is a risk of

explosion.

• Allow a hot battery to cool before charging.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any ad-

justments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool acciden-

tally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools clean and sharp. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the power tool in un-

expected situations.

5) Service

a) Have your power tool serviced by a qualied

repair person using only identical replace-

ment parts. This will ensure that the safety of the

power tool is maintained.

Safety instructions for reciprocating saws

• When performing work during which the elec-

trical tool can meet with concealed power lines

or its own power cord, hold the electrical tool

by the insulated handle surfaces. Contact with a

live power line can also electrify metal device parts

and lead to an electric shock.

• Fasten and secure the workpiece to a stable

base using clamps or other means. If the work-

piece is held only by hand or against the body, it

remains unstable, which may result in a loss of con-

trol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CRS450-20ProS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info